Dell R2 Bedienungsanleitung PDF herunterladen (Seite 20)

20 Important Information

System LEDs and Beep Codes

If your PowerEdge storage server is not booting or responding properly, you

can diagnose some problems using the system's LEDs and beep codes.

For more information about the LEDs and beep codes, see your system's

Installation and Troubleshooting Guide.

Troubleshooting Software-RAID PowerEdge Storage Servers

This section provides checks and solutions to try before you reinstall your

operating system or replace a hard drive. Some of the checks require you to observe

the LEDs on the front and back of the PowerEdge storage server. For more

information about the LEDs, see your Installation and Troubleshooting Guide.

• Does the power LED show that the PowerEdge storage server is turned on?

Ensure that the power cable is connected to the PowerEdge storage server

and a power source and that the PowerEdge storage server is turned on.

• Are the link LEDs on the back of the PowerEdge storage server and any

network switches to which it may be connected illuminated?

Ensure that the Ethernet cable is securely connected to the PowerEdge

storage server and a functioning Ethernet jack.

• Are you using a standard Ethernet cable to connect to the network?

Do not use a crossover cable.

• Have you allowed enough time for the PowerEdge storage server to boot?

The PowerEdge storage server typically takes several minutes to boot.

• Does the PowerEdge storage server boot completely?

Connect a keyboard, mouse, and monitor to the PowerEdge storage server,

and observe the boot process.

• Are the LEDs for all four hard drives on the PowerEdge storage server lit?

If the status LEDs are not all lit, you may have a failed hard drive.

Reconfiguring Your System After a Hard Drive Failure

This section provides information about reconfiguring your RAID 1

(mirrored) storage system in the event of a hard drive failure. See your system

documentation for information on hard drive failures and replacing a failed

hard drive.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Keine Kommentare

Dell R2 Bedienungsanleitung Seite 20