Dell PowerEdge 2850 Anleitung zur Fehlerbehebung PDF herunterladen (Seite 57)

b. Align the alignment pin on the bottom of the fan tray with the alignment hole on the system board.

c. Slide the fan tray straight down.

d. Press the two left latches until the release tab securely snaps into its securing slot.

Figure 6-10. Installing the Rear Fan Tray



10. Replace the two rear system fans. See "Replacing a Cooling Fan."



11. Close the system. See "Closing the System" in "Troubleshooting Your System."



12. Reconnect the system and peripherals to their power sources, and turn them on.



13. Enter the System Setup program and verify that the setting for the SCSI controller has changed to reflect the presence of the RAID hardware. See

"Using the System Setup Program" in your User's Guide.

See the RAC card documentation for information on configuring and using the RAC card.

Back to Contents Page



1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 75 76

Keine Kommentare

Dell PowerEdge 2850 Anleitung zur Fehlerbehebung Seite 57