
Table2-3 lists the drive indicator patterns. Different patterns are displayed as drive events occur in the system. For example, if a hard-drive fails, the "drive
failed" pattern appears. After the drive is selected for removal, the "drive being prepared for removal" pattern appears, followed by the "drive ready for
insertion or removal" pattern. After the replacement drive is installed, the "drive being prepared for operation" pattern appears, followed by the "drive online"
pattern.
Table 2-3. Hard-DriveIndicatorPatterns
Back-Panel Indicators and Features
Figure2-3 shows the back-panel features of the system. Table2-4 describes the back-panel features.
Figure 2-3. Back-Panel Features
Table 2-4. Back-Panel Features
NOTE: If RAID is not activated, only the "drive online" indicator pattern appears. The drive-activity indicator also blinks when the drive is being accessed.
The green power-on/fault indicator blinks four times per second.
Drive being prepared for removal
The green power-on/fault indicator blinks two times per second.
Drive ready for insertion or removal
Both drive indicators are off.
Drive being prepared for operation
The green power-on/fault indicator is on.
The power-on/fault indicator slowly blinks green, amber, and off.
The amber power-on/fault indicator blinks four times per second.
The green power-on/fault indicator blinks slowly.
The green power-on/fault indicator is on.
Provides information on power status. See "Power Indicator Codes."
Provides information on NIC status. See "NIC Indicator Codes."
Kommentare zu diesen Handbüchern