Service Manual
Precautions
5-18
1. Before you remove the Shield Controller Ass'y, you
should remove:
- Rear Cover (Refer to 5.4)
- Side Cover Left (Refer to 5.6.4)
2. Unplug the all connectors and remove the one screw
securing the Ground Cable.
3. Remove the five screws securing the Shield Controller
Ass'y and remove it.
4. Remove the three screws securing the Main PBA to
the Bracket and unplug the Film Cable and then
remove the Main PBA.
5. The connectors are located, as shown below.
5.10 Shield Controller Ass'y
Kommentare zu diesen Handbüchern