Dell Label Maker DCSM Bedienungsanleitung PDF herunterladen (Seite 26)

Hard Drive

Check the documentation for the drive to verify that it is configured for your computer.



Removing a Hard Drive



1. Follow the procedures in "Before you Begin."



2. Disconnect the power and hard-drive cables from the drive.



3. Press in on the blue tabs on each side of the drive and slide the drive up and out of the computer.

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.

CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.

NOTICE: To avoid damage to the drive, do not set it on a hard surface. Instead, set the drive on a surface, such as a foam pad, that will sufficiently

cushion it.

NOTICE: If you are replacing a hard drive that contains data you want to keep, back up your files before you begin this procedure.

serial ATA data cables

power cables

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 54 55

Kommentare zu diesen Handbüchern

Keine Kommentare

Dell Label Maker DCSM Bedienungsanleitung Seite 26

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Dell Label Maker DCSM