Dell INSPIRON 2600 Bedienungsanleitung PDF herunterladen (Seite 81)

Optical Drive

Removing an Installed Optical Drive

1. If a disc is in the optical drive, remove the disc.

2. Remove the memory module/modem cover:

a. Remove the M2.5 x 5-mm screw from the memory module/modem cover.

b. Slide the cover out approximately 10 mm, and lift it away from the computer.



3. Remove the M2.5 x 8-mm screw from the optical drive.

4. Press the optical-drive release button, and pull the optical drive out of the computer.



Installing an Optical Drive

NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.

NOTICE: Read "Preparing to Work Inside the Computer" before performing the following procedure.

NOTICE: Disconnect the computer and attached devices from electrical outlets, and remove any installed battery.

M2.5 x 5-mm screw

memory module/modem

cover

M2.5 x 8-mm screw

optical-drive release

button

optical drive

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 87

Keine Kommentare

Dell INSPIRON 2600 Bedienungsanleitung Seite 81