Dell INSPIRON 2600 Bedienungsanleitung PDF herunterladen (Seite 80)



3. Connect the modem cable to the new modem.

4. Align the modem with the screw holes and press the modem into its connector on the system board.

Install the two M2 x 3-mm screws to secure the modem to the system board.

5. Replace the memory module/modem cover and screw:

a. Place the memory module/modem cover over the memory module/modem compartment so that the end of the cover with the screw hole is lined

up with the lines and arrows on the bottom of the computer.

b. Press down on the center of the memory module/modem cover, and slide the cover until it is secured.

c. Replace and tighten the M2.5 x 5-mm screw.



M2 x 3-mm screws (2)

pull tab

modem cable connector

modem cable

NOTICE: The cable connectors are keyed for correct insertion; do not force the connections.

NOTICE: Replace the memory module/modem cover so that it is seated properly around the edges and does not bulge near the center of the cover.

Tightening the memory-module/modem cover screw when the cover is improperly seated can damage your computer.

M2.5 x 5-mm screw

memory module/modem

cover

arrows (2)

lines (2)

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 86 87

Keine Kommentare

Dell INSPIRON 2600 Bedienungsanleitung Seite 80