Dell PowerVault NX3100 Bedienungsanleitung PDF herunterladen (Seite 54)

54 Using the System Setup Program and UEFI Boot Manager

Exit Screen

Press <Esc> to exit the System Setup program; the Exit screen displays:

•

Save Changes and Exit

•

Discard Changes and Exit

•

Return to Setup

Entering the UEFI Boot Manager

NOTE: Operating systems must be 64-bit UEFI-compatible (for example,

Microsoft

Windows Storage Server

2012 R2 version) to be installed from

the UEFI boot mode. DOS and 32-bit operating systems can only be installed

from the BIOS boot mode.

NOTE: The Boot Mode must be set to UEFI in the System Setup program to access

the UEFI Boot Manager.

The UEFI Boot Manager enables you to:

• Add, delete, and arrange boot options

• Access the System Setup program and BIOS-level boot options without

rebooting

Turn on or restart your system.

Press <F11> after you see the following message:

<F11> = UEFI Boot Manager

NOTE: The system does not respond until the USB keyboard is active.

If your operating system begins to load before you press <F11>, allow the

system to finish booting, and then restart your system and try again.

Using the UEFI Boot Manager Navigation Keys

Keys Action

Up arrow Moves to and highlights the previous field.

Down arrow Moves to and highlights the next field.

Spacebar, <Enter>, <+>, <

–> Cycles through the settings in a field.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 163 164

Keine Kommentare

Dell PowerVault NX3100 Bedienungsanleitung Seite 54