Dell PowerVault MD3460 Series Bedienungshandbuch

Dell PowerVault MD3460 Storage ArraysOwner's ManualRegulatory Model: E08J SeriesRegulatory Type: E08J001

Item Indicator Icon Description8 Drive activity indicatorNOTE: The associated physical disk is indicated by a number (0 to 11) that is displayed above

Cooling Fan Module LED Indicator CodesFigure 5. Cooling Fan Module IndicatorsItem Indicator Icon Description1 Power indicator The power indicator ligh

Power Supply Module Features And Indicators NOTE: Your storage array is shipped with two IEC C19 to C20 jumper cords. Connect the C19 plug to the arra

Item Indicator or Connector Icon DescriptionOff Indicates that you cannot remove the power supply module from the system.6 Service action required ind

Item Indicator Icon Description1 Service action allowed indicatorCAUTION: Remove the physical disk from the system only if the service action allowed

2Controller ModulesRAID Controller ModulesRAID controller modules provide high-performance, advanced virtual disk configuration, and fault-tolerant di

Item Indicator, Button, or ConnectorIcon Description3 12 Gbps SAS IN port (2) Provides host-to-controller SAS connection.4 USB port Reserved port.5 Mi

MD3060e Expansion Module Features And IndicatorsFigure 9. MD3060e Expansion Module Features and IndicatorsItem Indicator, Button, or ConnectorIcon Des

RAID Controller Module—Additional FeaturesBattery Backup UnitEach RAID controller module contains a two-cell Lithium ion nanopolymer battery backup un

3Installing and removing system components Recommended ToolsYou may need the following items to perform the procedures in this section:• #2 Phillips s

Notes, Cautions, and WarningsNOTE: A NOTE indicates important information that helps you make better use of your computer.CAUTION: A CAUTION indicates

Figure 10. Removing and Installing the Front Bezel1. release latches (2) 2. front bezel3. guide pins (4)Removing The Front BezelYou must remove the fr

Figure 11. Inside the Physical-Disk Drawer1. release latch (2) 2. physical-disk bay (12)3. physical-disk connector (12) 4. SAS cable connection (2)5.

Figure 12. Opening and Closing the Physical-Disk Drawer1. physical-disk drawer 2. release latchClosing The Physical-Disk DrawerCAUTION: Many repairs m

For more information, see the Dell PowerVault MD Series Storage Arrays Administrator's Guide at dell.com/powervaultmanuals.2. Remove the front be

Figure 13. Removing and Installing the Physical-Disk Drawer1. physical-disk drawer 2. release tabInstalling The Physical-Disk DrawerCAUTION: Many repa

6. Install the front bezel.7. Using the MD Storage Manager, verify that the new physical-disk drawer is identified and operating correctly.Physical Di

Figure 15. Removing and Installing the 2.5 Inch Physical Disk in a 2.5 Inch Physical-Disk Carrier1. 2.5 inch physical drive cage 2. guide pin (4)3. re

Figure 16. Removing and Installing the 3.5 Inch Physical Disk in a 3.5 Inch Physical-Disk Carrier1. 3.5 inch physical disk 2. release handle3. holes o

Removing A Physical Disk From A Physical-Disk DrawerCAUTION: Many repairs may only be done by a certified service technician. You should only perform

7. release tab (12)Installing A Physical Disk In A Physical-Disk DrawerCAUTION: Many repairs may only be done by a certified service technician. You s

Contents1 About your system... 6Introduction...

3. SAS chain cable (two per physical-disk drawer)Removing The SAS Chain Cable(s)CAUTION: Many repairs may only be done by a certified service technici

Figure 19. Removing and Installing the SAS Chain Cable(s)1. left cooling fan module bay 2. right cooling fan module bay3. SAS cable connector on the m

CAUTION: If you are hot swapping the SAS cable chains, ensure that you complete the procedure on one side within ten minutes to avoid over heating of

Figure 20. Removing and Installing a RAID Controller Module or Expansion Module1. RAID controller module or expansion module2. release lever3. release

Opening The RAID Controller ModuleCAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting an

RAID Controller Module Backup Battery UnitThe battery backup unit provides backup power to the RAID controllers in case of power failure. It ensures p

Installing The RAID Controller Module Backup Battery UnitYou must replace the RAID controller battery backup unit immediately to ensure the security o

NOTE: The Service action required indicator lights amber when there is a fault in the power supply module.2. Disconnect the power cable from the power

CAUTION: When connecting the power cable, secure the cable with the cable securing bracket.NOTE: When installing or hot-swapping a new power supply mo

Figure 24. Removing and Installing the Cooling Fan Module1. cooling fan module release latch 2. cooling fan module handle3. cooling fan moduleInstalli

SAS Chain Cables... 29Rem

4Troubleshooting your systemSafety first—for you and your systemCAUTION: Many repairs may only be done by a certified service technician. You should o

Troubleshooting Power Supply ModulesCAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting

Troubleshooting Expansion Enclosure Management ModulesCAUTION: Many repairs may only be done by a certified service technician. You should only perfor

Troubleshooting Physical DisksCAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and si

• Physical disks• RAID controller modules• Power supply modules• Cooling fan modules3. Let the system dry thoroughly for at least 24 hours.4. Reinstal

Noncritical ConditionsA noncritical condition is an event or status that does not cause immediate failure, but must be corrected to ensure continued r

5Technical SpecificationsPhysical DisksPhysical disks Up to sixty 3.5 inch or 2.5 inch SAS or nearline SAS physical disks or 2.5 inch SAS SSDsRAID Con

Back-Panel Connectors (Per RAID Controller Module)Two SAS OUT ports, it is recommended that you use the first port for expansion to an additional Powe

EnvironmentalNOTE: For information on supported expanded operating temperature range and configurations, see the Owner's Manual at dell.com/suppo

6Getting help Locating your system service tagYour system is identified by a unique Express Service Code and Service Tag number. The Express Service C

Locating your system service tag...49Contacting De

1About your system IntroductionCAUTION: See the Safety, Environmental, and Regulatory Information document for important safety information before fol

• Dell PowerVault MD Series Storage Arrays Administrator's Guide — Provides information about configuring and managing the system using the MDSM

Front-Panel Indicators Figure 2. Front-Bezel IndicatorsFigure 3. Front-Panel Indicators8

Item Indicator Icon Description1 Power-on indicator The power-on indicator lights green when at least one power supply module is supplying power to th