Dell 10g Betriebsanweisung PDF herunterladen (Seite 15)

Deployment Guide 15

%SystemDrive%\Temp

where

%SystemDrive% is the user’s local drive.

Repeat all steps in this section for all nodes in the cluster.

Verifying Cluster Hardware and Software

Configurations

Before you begin the cluster setup, ensure that you have the minimum hardware

installed as shown in Table 1-2. This section provides setup information for

hardware and software cluster configurations.

Each node must have the following software installed:

• Windows Server 2003 SP2 Standard/Enterprise x64 Edition (see Table 1-1)

•HBA drivers

The storage must be configured with a minimum of four virtual disks/LUNs

(two for the redundant Voting Disk and Oracle Cluster Registry and two for the

database and Flash Recovery area) assigned to cluster nodes.

Setting Up Your Fibre Channel Cluster

After a Dell Managed Services representative completes the setup of your Fibre

Channel cluster, verify the hardware connections and the hardware and software

configurations as described in this section. Figure 1-1, Figure 1-2, and Table 1-5

illustrate the required cluster connections for a storage area

network (SAN)-attached Fibre Channel cluster with two nodes.

Table 1-4. Virtual Disk (LUN) Configuration and Sizes

Virtual

Disk/LUN

Minimum Size Number of Partitions Used for

1 2 GB 5 (3 x 50 MB and

2x120 MB)

Voting disk (3 x 50 MB)

Oracle Registry

(2x120MB)

2 Larger than the database 1 Database

3 At least twice the size of

the database

1 Flash Recovery Area

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 77 78

Keine Kommentare

Dell 10g Betriebsanweisung Seite 15