Dell OptiPlex GX260 Bedienungsanleitung PDF herunterladen (Seite 16)

Back to Contents Page

Battery

Dell™ OptiPlex™ GX260 Service Manual

Replacing the Battery

CAUTION: A new battery can explode if it is incorrectly installed. Replace the battery only with the same

or equivalent type recommended by the manufacturer. Discard used batteries according to the

manufacturer's instructions.

1. If you have not already done so, make a copy of your configuration information, found in system setup.

2. Open the computer cover.

3. Locate the battery socket labeled BATTERY (see "System Board

").

NOTICE: If you pry the battery out of its socket with a blunt object, be careful not to touch the system board with the

object. Ensure that the object is inserted between the battery and the socket before you attempt to pry out the

battery. Otherwise, you may damage the system board by prying off the socket or by breaking circuit traces on the

system board.

4. Remove the battery by carefully prying it out of its socket with your fingers or with a blunt, nonconducting object such

as a plastic screwdriver.

5. Insert the new battery into the socket with the side labeled "+" facing up, and snap the battery into place.

NOTICE: To connect a network cable, first plug the cable into the network wall jack, and then plug it into the

computer.

6. Close the computer cover, and plug your computer and devices into electrical outlets.

7. Replace the padlock, if required.

8. Properly dispose of the old battery.

Back to Contents Page

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 99 100

Keine Kommentare

Dell OptiPlex GX260 Bedienungsanleitung Seite 16