Dell UPS 1000T Bedienungsanleitung PDF herunterladen (Seite 18)

Dell UPS Management Software: Common Software Installation Scenarios

Figure 19: Connectivity diagram for redundant Dell UPS with LAN connection to four

Dell servers



Power cables are shown for illustrative purposes only.

For best practices for cabling, refer to the Dell UPS Cabling Guide.

Scenario 3: Connectivity

ConnecttheDellUPS#1totheprimaryside(PSU)ofservers1&2andthesecondarysideofservers3&4.

ConnecttheUPS#2totheprimaryside(PSU)ofservers3&4andthesecondarysideofservers1&2.

TheDellUPSin

thisexamplehastheoptionalNetworkManagementCard(NMC,H910P)installed,butthesame

setupandconfigurationcanbeappliedtoUSBconnectivitysolutions.AllserversandUPSsareconnectedtothe

customerLAN.



Scenario 3: Installation notes

Ensure each Dell Network Management card has been assigned a static IP address (see NMC user guide

for full instructions).

Install the Dell ULNM application on all servers powered by the Dell UPS.

ULNM Configuration (repeat for each server):

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Keine Kommentare

Dell UPS 1000T Bedienungsanleitung Seite 18