Dell UPS 1000T Bedienungsanleitung PDF herunterladen (Seite 42)

Configuration 42

Use Case 2

To save battery backup time, you want to perform load shedding. You want to stop your computer after a

predefined time.

• Configure a Shutdown timer value on Dell ULNM#1. This configuration parameter is available from

Settings > Shutdown > Edit Shutdown Configuration

Architecture #2

This section provides shutdown use cases for a network-attached UPS through Web SNMP Card (see

Figure 24).

Figure 24. Architecture #2 Schema

Use Case 1

You want to keep all your computers alive as long as possible.

• This is the default configuration for the Dell ULNM and the Dell Network Management Card.

– The Dell ULNM default configuration is available from

Settings > Shutdown > Edit Shutdown Configuration

– The Dell Network Management Card default shutdown configuration is available from

UPS > Shutdown Configuration

, as illustrated in Figure 25.

0120_3-Dell ULNM UG.book Page 42 Saturday, November 2, 2013 5:34 PM

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 146 147

Keine Kommentare

Dell UPS 1000T Bedienungsanleitung Seite 42