Dell PowerVault NX3500 Bedienungsanleitung PDF herunterladen (Seite 19)

About Your Solution 19

Power Indicator Codes

The power supplies have an indicator that shows whether power is present or

whether a power fault has occurred.

• Not lit—AC power is not connected.

• Green—In standby mode, indicates that a valid AC source is connected to

the power supply, and that the power supply is operational. When the

system is on, it also indicates that the power supply is providing DC power

to the system.

• Amber—Indicates a problem with the power supply.

• Alternating green and amber—When hot-adding a power supply, this

indicates that the power supply is mismatched with the other power

supply (a high output power supply and an Energy Smart power supply are

installed in the same system). Replace the power supply that has the

flashing indicator with a power supply that matches the capacity of the

other installed power supply.

Indicator Indicator Code

Link and activity

indicators are off

The NIC is not connected to the network.

Link indicator is green The NIC is connected to a valid network link at

1000 Mbps.

Link indicator is amber The NIC is connected to a valid network link at

10/100 Mbps.

Activity indicator is

green blinking

Network data is being sent or received.

book.book Page 19 Monday, January 24, 2011 12:24 PM

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 117 118

Keine Kommentare

Dell PowerVault NX3500 Bedienungsanleitung Seite 19