Dell PowerEdge 1750 Bedienungsanleitung PDF herunterladen (Seite 15)

Rack Installation Guide 1-9

Installing the VersaRails Slide Assemblies

1 At the front of the rack cabinet, position one of the VersaRails slide assemblies so that

its mounting-bracket flange fits between the marks or tape (or numbered location) on

the rack (see Figure 1-6).

The three holes on the front of the mounting bracket should align with three of the

holes between the marks you made on the front vertical rail.

2 Install two 10-32 x 0.5-inch flange-head Phillips screws in the mounting flange’s top

and bottom holes to secure the slide assembly to the front vertical rail (see Figure 1-6).

3 At the back of the cabinet, pull back on the mounting-bracket flange until the

mounting holes align with their respective holes on the back vertical rail.

4 Install three 10-32 x 0.5-inch flange-head Phillips screws in the back mounting holes to

secure the slide assembly to the back vertical rail.

Figure 1-6. Installing the VersaRails Slide Assemblies

front of rack

slide assemblies (2)

10-32 x 0.5-inch

flange-head Phillips

screws (5 per slide

assembly)

mounting-bracket flange

5X860eb0.fm Page 9 Monday, October 21, 2002 11:49 AM

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 179 180

Keine Kommentare

Dell PowerEdge 1750 Bedienungsanleitung Seite 15