Dell 110T DLT1 Drive Bedienungsanleitung PDF herunterladen (Seite 5)

Introduction: Dell PowerVault 110T DLT VS160 Tape Drive User's Guide

file:///C|/Users/rishi_sood/Desktop/Temp/MissingDocsPosted/110t_dlt/UG/intro.htm[3/8/2013 11:46:11 AM]

Media Slow Blink (1x per second) Unsupported format, or damaged or unsupported cartridge type

inserted into drive

On DLT1 format DLTtape™ IV cartridge loaded

See

Troubleshooting the Drive in Troubleshooting for more details on error conditions.

Unload/Eject Button Features

The Unload/Eject button provides features in addition to unloading and ejecting a cartridge. To activate one of these features, press

and hold the Unload/Eject button for the amount of time specified in

Table 3. Release the Unload/Eject button when the desired

LED sequence is displayed.

If you do nothing for 15 seconds after accessing any of the additional features that require an action, such as loading a cartridge,

the drive returns to normal operating mode.

NOTICE: The Unload/Eject button features indicated by an asterisk (*) in Table 3 overwrite all data on the

cartridge loaded in the drive. Use extreme caution when accessing these features to avoid loss of important

data.

Table 3. Unload/Eject button features

LED Status

Button Hold

Time (seconds)

Feature Description

Ready Fault Clean Media

On N/A N/A N/A 0-6 Normal unload/eject function

Blinking Off Off Off 6-9 Reserved

Blinking Blinking Blinking Off 12-15 Reserved

Blinking Blinking Blinking Blinking 15-18 Reserved

On Off Off Off 18-21 Revert to normal operating mode

On On Off Off 21-24 Write/read diagnostic mode*

On On On Off 24-27 Reserved*

On On On On 27-30 Emergency reset

Off Off Off Off 30+ Revert to normal operating mode

Unload/Eject Button Feature Description

Normal Unload/Eject

When you release the button, the drive unloads and ejects the cartridge.

Write/Read Diagnostic Mode

NOTICE: This mode overwrites all data on the cartridge in the drive. Use extreme caution when using this

feature to avoid loss of important data.

When you release the button, the drive initiates an internal write/read diagnostic. The diagnostic requires that you first load a

cartridge that is blank or does not contain valuable data. When the diagnostic begins, the drive writes and then reads approximately

400MB of data and then unloads and ejects the cartridge. The process takes about two minutes. If the diagnostic test detects no

errors, the drive returns to normal operating mode. If an error occurs, the appropriate LEDs illuminate.

Emergency Reset

1 2 3 4 5 6 7 8 9 10 ... 37 38

Kommentare zu diesen Handbüchern

Keine Kommentare

Dell 110T DLT1 Drive Bedienungsanleitung Seite 5

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerhardware Dell 110T DLT1 Drive