Dell 110T DLT1 Drive Bedienungsanleitung PDF herunterladen (Seite 21)

Using the Tape Drive: Dell PowerVault 110T DLT VS160 Tape Drive User's Guide

file:///C|/Users/rishi_sood/Desktop/Temp/MissingDocsPosted/110t_dlt/UG/usage.htm[3/8/2013 11:46:13 AM]

data.

Table 3. Unload/Eject button features

LED Status

Button Hold

Time (seconds)

Feature Description

Ready Fault Clean Media

On N/A N/A N/A 0-6 Normal unload/eject function

Blinking Off Off Off 6-9 Reserved

Blinking Blinking Blinking Off 12-15 Reserved

Blinking Blinking Blinking Blinking 15-18 Reserved

On Off Off Off 18-21 Revert to normal operating mode

On On Off Off 21-24 Write/read diagnostic mode*

On On On Off 24-27 Reserved*

On On On On 27-30 Emergency reset

Off Off Off Off 30+ Revert to normal operating mode

Unload/Eject Button Feature Description

Normal Unload/Eject

When you release the button, the drive unloads and ejects the cartridge.

Write/Read Diagnostic Mode

NOTICE: This mode overwrites all data on the cartridge in the drive. Use extreme caution when using this

feature to avoid loss of important data.

When you release the button, the drive initiates an internal write/read diagnostic. The diagnostic requires that you first load a

cartridge that is blank or does not contain valuable data. When the diagnostic begins, the drive writes and then reads approximately

400MB of data and then unloads and ejects the cartridge. The process takes about two minutes. If the diagnostic test detects no

errors, the drive returns to normal operating mode. If an error occurs, the appropriate LEDs illuminate.

Emergency Reset

When you release the button, the drive performs a hard reset, behaving as if it had been turned off and then on. A standard POST

then takes place.

Revert to Normal Operating Mode

When you release the button, the drive returns to normal operation.

Loading a Tape Cartridge

The PowerVault 110T DLT VS160 Tape drive reads and writes DLTtape VS1 cartridges. The PowerVault 110T DLT VS160 Tape

drive can read - but not write - DLTtape™ IV cartridges written using the DLT1/VS80 format.

NOTE: The PowerVault 110T DLT VS160 Tape drive automatically ejects any other cartridge types and any cartridges

whose format it cannot read. Make sure all cartridges that you want to use for writing are DLTtape VS1 cartridges.

Loading a cartridge into the PowerVault 110T DLT VS160 Tape drive is fast and easy. After the drive completes POST, insert the

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 37 38

Keine Kommentare

Dell 110T DLT1 Drive Bedienungsanleitung Seite 21