Dell POWEREDGE 2950 Bedienungsanleitung PDF herunterladen (Seite 20)

18 Rack Installation Guide

Routing Cables

Open the wire cable basket on the top of the cable-management arm

, to

enable cables to be routed

within the arms (see Figure 1-9).

Figure 1-9. Routing Cables on the Cable-Management Arm

If applicable, connect the system status-indicator cable to its connector on the system back panel.

Route the system status-indicator cable through the cable-management arm, and press the LED end

into the slot on the end of the cable-management arm until it snaps into place.

Attach the I/O cable connectors and power cable connectors to their respective connectors on the

system back panel.

For details on cable connections, see your system’s Getting Started Guide or Hardware Owner’s

Manual.

NOTE: Use the retainer brackets on the back of the power supplies to provide strain relief for the power

cables.

4 Route the cables along the bend in the cable-management arm.

Adjust the cable slack as needed at the hinge position and secure the cables with the tie wraps

(see Figure 1-9).

Close the cable basket.

1 tie wraps (2) 2 system status-indicator cable connector

3 cable-management arm 4 wire cable basket

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 111 112

Keine Kommentare

Dell POWEREDGE 2950 Bedienungsanleitung Seite 20