Dell POWEREDGE 2950 Bedienungsanleitung PDF herunterladen (Seite 19)

Rack Installation Guide 17

Pull the system out of the rack until it stops because of the safety catch.

Pull up on the front release latch on each rail to disengage the safety catch (see Figure 1-7) and slide

the system forward.

Pull the system completely out of the rack.

Installing the Cable-Management Arm

NOTE: You can attach the

cable-management arm to either side of the rack cabinet.

NOTE: Attach the

cable-management arm ramp assembly to the side opposite of where you attach the cable-

management arm.

Fit the latch on the front end of the cable-management arm onto the bracket on the end of the

mounting rail until the latch clicks (see Figure 1-8).

Fit the latch on the unattached end of the cable-management arm onto the bracket on the end of the

slide assembly until the latch clicks (see Figure 1-8).

CAUTION: Both ends of the cable-management arm must be connected before you begin routing the system

cables

Figure 1-8. Installing the Cable-Management Arm

1 mounting rails (2) 2 brackets (2)

3 latches (2) 4 cable-management arm

back of system

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 111 112

Keine Kommentare

Dell POWEREDGE 2950 Bedienungsanleitung Seite 19