Back to Contents Page
Radio Switch Board
Dell™Latitude™E4300ServiceManual
Removing the Radio Switch Board
Replacing the Radio Switch Board
Removing the Radio Switch Board
1. Follow the instructions in What You Need to Know For Your Safety.
2. Remove the LED dashboard cover (see Removing the LED Dashboard Cover).
3. Remove the keyboard (see Removing the Keyboard).
4. Remove the display assembly (see Removing the Display Assembly).
5. Remove the palm rest (see Removing the Palm Rest).
6. DisconnectcablestoWLAN,WWAN,and/orLatitudeOn™cards(asinstalledonyourcomputer)fromtheradioswitchboard.
7. Disconnect the radio switch board cable.
8. Remove the M2 x 3-mm screw securing the radio switch board to the plastic cage on the system board.
9. Lift the radio switch board away from the computer.
Replacing the Radio Switch Board
CAUTION: Before working inside the computer, read the safety information that shipped with the computer. For additional safety best practices
information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.
NOTE: The system with Blacktop configuration does not contain a radio switch board or support Latitude ON. In this configuration, the system antenna
cables coming from the LCD assembly are longer, and route directly through the
system board and to the WLAN card.
Kommentare zu diesen Handbüchern