Back to Contents Page
Smart Card
Dell™Latitude™E4300ServiceManual
Removing the Smart Card
Replacing the Smart Card
Removing the Smart Card
1. Complete the steps in What You Need to Know For Your Safety.
2. Remove the hard drive (see Removing the Hard Drive).
3. Remove the display assembly (see Removing the Display Assembly).
4. Remove the keyboard (see Removing the Keyboard).
5. Remove the palm rest assembly (Removing the Palm Rest).
6. Remove the four M2 x 3-mm screws that secure the card to the computer base.
7. Disconnect the card cable from the system board.
8. Lift the card from the system board.
Replacing the Smart Card
1. Reseat the smart card.
2. Replace the four M2 x 3-mm screws to secure the card to the computer base.
3. Reconnect the card cable to the system board.
4. Replace the palm rest assembly (Replacing the Palm Rest).
5. Replace the keyboard (see Replacing the Keyboard).
6. Replace the display assembly (see Replacing the Display Assembly).
CAUTION: Before working inside the computer, read the safety information that shipped with the computer. For additional safety best practices
information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.
Kommentare zu diesen Handbüchern