Dell PowerVault DL2000 Bedienungsanleitung PDF herunterladen (Seite 10)

Cabling The Appliance

1. Locate the PowerVault DL2

xxx

and PowerVault MD

xxxx

Getting Started Guides

that shipped with the appliance and

follow the instructions to attach the keyboard, mouse, monitor, and power and network cables to the PowerVault

DL2

xxx

system.

2. Attach the power cables to each storage enclosure.

NOTE: Do not turn on the PowerVault DL2

xxx

system or storage enclosure(s).

NOTE: If the appliance configuration does not include one or more storage enclosures, proceed to the topic

“Connecting the Cable Management Arm (Optional)”.

Setting The Storage Mode

1. Locate the configuration switch for the storage enclosure.

2. Set the storage mode for each storage enclosure to unified mode .

NOTE: The configuration switch must be set to unified mode before turning on the storage enclosure. Changing the

configuration mode after turning on the storage enclosure has no effect on enclosure configuration until the

system is power cycled. For more information, see the

Dell PowerVault MDxxxx Hardware Owner's Manual

support.dell.com/manuals.

Figure 1. Setting the PowerVault MD1000 Storage Enclosure Configuration Switch

1. configuration switch

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 68 69

Keine Kommentare

Dell PowerVault DL2000 Bedienungsanleitung Seite 10