Dell PowerEdge M605 Bedienungsanleitung PDF herunterladen (Seite 115)

はじめに 113

手順

Next, an IP address is setup. The IP address is defined on the

default VLAN (VLAN #1), of which all ports are members. This is the

IP address you use to access the CLI, Web interface, or SNMP

interface for the switch.

Optionally you may request that the system automatically retrieve

an IP address from the network via DHCP (this requires that you

have a DHCP server running on the network).

To setup an IP address:

Please enter the IP address of the device (A.B.C.D) or enter "DHCP"

(without the quotes) to automatically request an IP address from

the network DHCP server.

192.168.2.1<Enter>

Please enter the IP subnet mask (A.B.C.D or /nn):

255.255.255.0<Enter>

手順

Finally, set up the gateway. Please enter the IP address of the

gateway from which this network is reachable

192.168.1.1<Enter>

This is the configuration information that has been collected:

SNMP Interface = "public"@192.168.2.1

User Account setup = admin

Password = **********

Management IP address = 192.168.2.1 255.255.255.0

Gateway = 0.0.0.0

手順

If the information is correct, please select (Y) to save the

configuration, and copy to the start-up configuration file. If the

information is incorrect, select (N) to discard configuration and

restart the wizard: [Y/N]

y<Enter>

Thank you for using the Dell Easy Setup Wizard. You will now enter

CLI mode.

.....

console>

JR181.book Page 113 Thursday, June 7, 2007 11:48 AM

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 181 182

Keine Kommentare

Dell PowerEdge M605 Bedienungsanleitung Seite 115