Dell OptiPlex GX1p Bedienungsanleitung

Dell™OptiPlex™GX1p Specifications Jumpers Controls and Indicators Tech Notes Graphics Documentation Initial release: 21 Aug 1998 Last revised: 5

SystemBoards:Dell™OptiPlex™GX1p First revision system board

System Board: Dell™ OptiPlex™ GX1 Systems Second revision system board

test

test

Video:Dell™OptiPlex™GX1p All systems include an onboard high-performance, 64-bit accelerated graphics port (AGP 2X) subsystem that drives an extern

WakeupOnLAN:Dell™OptiPlex™GX1p The Dell OptiPlex GX1p is available with an integrated Wakeup On LAN-capable network option.

Production Notes 1. Find out what the Tapi connector is on the system board per David Weber's 8/6 message. 2. Question regarding EDO vs. SDRAM D

Drivers and Utilities: OptiPlex GX1p See "Using Drivers and Utilities" in the online System User's Guide.

Documentation:Dell™OptiPlex™GX1p Guided'utillisationdeDellOptiPlexGX1pavecgestionamélioréeSommaire (.hlp) Guidederéférenceetd&apo

Graphics:Dell™OptiPlex™GX1p System Board Jumpers Controls and Indicators Internal View of the Midsize Computer Internal View of the Mini Tower C

Internal View of the Low-ProfileComputer:Dell™OptiPlex™GX1p

InternalViewoftheMidsizeComputer:Dell™OptiPlex™GX1p         

InternalViewoftheMiniTowerComputer:Dell™OptiPlex™GX1p

SystemBoard:Dell™OptiPlex™GX1p 

I/OMap:Dell™OptiPlex™GX1p   AddressDevice 0000-000FDMA controller #1 0020-003FInterrupt controller #1 0040-0043System timers 0044-005FReserved0

I/OPortsandConnectors:Dell™OptiPlex™GX1p

UpdatedATAPI:Dell™OptiPlex™GX1p Reinstalling the Microsoft®Windows NT®4.0 Microsoft-Updated ATAPI Driver | Removing the Windows NT 4.0 Microsoft

IRQAssignments:Dell™OptiPlex™GX1p 1IRQ3isavailableprovidedthatnootherdeviceinthecomputer(suchasamodem)isusingCOM2orCOM4. 2 If

Jumpers:Dell™OptiPlex™GX1p = jumpered = unjumpered 1 Either the 450 MHz or 400 MHz speed jumper pins must have a jumper plug installed. 2 As o

Memory:Dell™OptiPlex™GX1p Installation Guidelines | Configuration Options | Memory Map Installation Guidelines For information on installing DIMMs

SystemErrorMessages:Dell™OptiPlex™GX1p This section lists (in alphabetical order) system error messages that can appear on the monitor screen. Th

controller (defective system board). Memory address line failure at address, read value expecting value Memory data line failure at address, read valu

 protected mode malfunctioning, or one or more DIMMs improperly seated. Indicates a fatal error.keyboard/mouse controller chip (defective system boar

NIC:Dell™OptiPlex™GX1p The OptiPlex GX1p system includes an onboard Ethernet NIC subsystem. The integrated 10/100-Mbps 3Com®PCI 3C905B-TX Ethernet

TechNotes:Dell™OptiPlex™GX1p Video Memory Expansion Subsystem Power Hard-Disk Drive Options I/O Map POST Beep Codes PCI-to-PCI Bridging NIC Syste

PCI-to-PCI Bridging: OptiPlex GX1p PCI-to-PCI bridging is supported in this system.

Power:Dell™OptiPlex™GX1p DC Voltage Ranges | DC Power Cables | DC Power Distribution (Midsize Chassis) | DC Power Distribution (Mini Tower Chassis)

POSTBeepCodes:Dell™OptiPlex™GX1p If the monitor cannot display error messages during the POST, the system may emit a series of beeps that identif

 DC Power Distribution (Mini Tower Chassis)

RemovingandReplacingParts:Dell™OptiPlex™GX1p Precautionary Measures | Procedures | Recommended Tools Precautionary Measures Before you remove or

   

ExpansionSubsystem:Dell™OptiPlex™GX1p ISA Configuration Utility | Low-Profile Chassis Riser Board | Midsize Chassis Riser Board | Mini-Tower Chass

l Option 1 is a passive riser board, with no PCI-to-PCI bridge. ISA1 and PCI3 share the same card-slot opening. l Option 2 is an active riser board,

Riser Board for the Low-ProfileComputer:Dell™OptiPlex™GX1p 

RiserBoardfortheMidsizeComputer(Option1):Dell™OptiPlex™GX1p 

RiserBoardfortheMiniTowerComputer:Dell™OptiPlex™GX1p 

RiserBoardfortheMidsizeComputer(Option2):Dell™OptiPlex™GX1p 

ExpansionSubsystem:Dell™OptiPlex™GX1p Midsize Chassis Riser Board | Mini Tower Chassis Riser Board Midsize Chassis Riser Board ISA1 shares its ca

Bus-mastering:Dell™OptiPlex™GX1p This system supports PCI bus-mastering on all slots.

Computer Cover Removal (Low-ProfileChassis):Dell™OptiPlex™GX1p To remove the computer cover, follow these steps: 1. Turn off power to the compute

System Board Removal (Low-ProfileChassis):Dell™OptiPlex™GX1p   To remove the system board, follow these steps: 1. Disconnect all cables from th

DIMM Removal and Installation (Low-Profile Chassis): OptiPlex GX1p DIMM Removal | DIMM Installation DIMM Removal   To remove a DIMM from 1 of the

Video Memory Removal (Low-ProfileChassis):Dell™OptiPlex™GX1p   You can upgrade video memory from 4 MB to 8 MB by installing a video-memory upgr

SEC Cartridge/Heat Sink Assembly Removal (Low-ProfileChassis):Dell™OptiPlex™GX1p  To remove the SEC cartridge/heat sink assembly, follow these s

System Battery Removal (Low-ProfileChassis):Dell™OptiPlex™GX1p To remove the system battery, follow these steps: 1. If possible, boot the system

Eject-, Power-, and Reset-Button Removal (Low-ProfileChassis):Dell™OptiPlex™GX1p    To remove the eject, power, and reset buttons, follow thes

Front-Panel Insert Removal (Low-ProfileChassis):Dell™OptiPlex™GX1p  To remove a front-panel insert, follow these steps: 1. Lay the computer cove

Control Panel Removal (Low-ProfileChassis):Dell™OptiPlex™GX1p To remove the control panel, follow these steps: 1. Disconnect the control panel ca

Drive Hardware Removal (Low-Profile Chassis): OptiPlex GX1p Drive Hardware | 3.5-Inch Diskette-Drive Removal | 5.25-Inch Drive Assembly Removal | Hard

ControlsandIndicators:Dell™OptiPlex™GX1p Midsize Chassis | Mini Tower Chassis Midsize Chassis  Mini Tower Chassis  Power button Turns comp

 To remove a 5.25-inch drive assembly, follow these steps: 1. Remove the 3.5-inch diskette drive assembly. 2. Disconnect the DC power cable and th

System Power-Supply Removal (Low-ProfileChassis):Dell™OptiPlex™GX1p  To remove the system power supply, follow these steps: 1. Disconnect the AC

Expansion-Card Cage Removal (Low-ProfileChassis):Dell™OptiPlex™GX1p  To remove an expansion-card cage, follow these steps: 1. Rotate the lever t

Expansion-Card Removal (Low-ProfileChassis):Dell™OptiPlex™GX1p To remove an expansion card, follow these steps: 1. Disconnect any external cable

Riser Board Removal (Low-ProfileChassis):Dell™OptiPlex™GX1p  To remove the riser board, follow these steps: 1. Remove the expansion-card cage an

OptionalStandRemoval(MidsizeChassis):Dell™OptiPlex™GX1p  To remove the optional stand, follow these steps: 1. Place the right side of the com

RiserBoardRemoval(MidsizeChassis):Dell™OptiPlex™GX1p  To remove the riser board, follow these steps: 1. Remove the expansion-card cage and r

SystemBoardRemoval(MidsizeChassis):Dell™OptiPlex™GX1p   To remove the system board, follow these steps: 1. Disconnect all cables from their

DIMM Removal and Installation (Midsize Chassis): OptiPlex GX1p DIMM Removal | DIMM Installation DIMM Removal   To remove a DIMM from one of the 3

VideoMemoryRemoval(MidsizeChassis):Dell™OptiPlex™GX1p  To replace the video-memory upgrade module, follow these steps: 1. Remove the expansi

DellInspectorUtility:Dell™OptiPlex™GX1p The Dell Inspector utility uses Desktop Managment Interface (DMI) support to display detailed information

SECCartridge/HeatSinkAssemblyRemoval(MidsizeChassis):Dell™OptiPlex™GX1p  To remove the SEC cartridge/heat sink assembly, follow these steps

SystemBatteryRemoval(MidsizeChassis):Dell™OptiPlex™GX1p To remove the system battery, follow these steps: 1. If possible, boot the system and

ComputerCoverRemoval(MidsizeChassis):Dell™OptiPlex™GX1p  To remove the computer cover, follow these steps: 1. Turn off power to the computer

Eject, Power, and Reset Button Removal (Midsize Chassis): OptiPlex GX1p  To remove the eject, power, and reset buttons, follow these steps: 1. Lay

Front-Panel Insert Removal (Midsize Chassis): OptiPlex GX1p  To remove a front-panel insert, follow these steps: 1. Lay the computer cover upside d

ControlPanelRemoval(MidsizeChassis):Dell™OptiPlex™GX1p To remove the control panel, follow these steps: 1. Remove the hard-disk drive bracket

DriveHardwareRemoval(MidsizeChassis):Dell™OptiPlex™GX1p Drive Hardware | 3.5-Inch Diskette-Drive Removal | 5.25-Inch Drive Assembly Removal | H

 To remove a 5.25-inch drive assembly from the middle or lower drive bay, follow these steps: 1. Disconnect the DC power cable and the interface ca

2. Remove the screw that secures the hard-disk drive bracket to the front of the chassis. 3. Grasp the handle on the front of the bracket, and rotate

System Power-SupplyRemoval(MidsizeChassis):Dell™OptiPlex™GX1p  To remove the system power supply, follow these steps: 1. Disconnect the AC pow

DMA Channel Assignments:Dell™OptiPlex™GX1p DREQ LineUsed By/AvailableDREQ0AvailableDREQ1AvailableDREQ2Super I/O controller (to initiate DMA cycle f

Expansion-CardCageRemoval(MidsizeChassis):Dell™OptiPlex™GX1p   To remove an expansion-card cage, follow these steps: 1. Rotate the lever tow

ExpansionCardRemoval(MidsizeChassis):Dell™OptiPlex™GX1p To remove an expansion card, follow these steps: 1. Disconnect any external cables fr

Computer Cover Removal (Mini Tower Chassis): OptiPlex GX1p  To remove the computer cover, follow these steps: 1. Turn off power to the computer and

RiserBoardRemoval(MiniTowerChassis):Dell™OptiPlex™GX1p  To remove the riser board, follow these steps: 1. Remove the expansion-card cage and

SystemBoardRemoval(MiniTowerChassis):Dell™OptiPlex™GX1p   To remove the system board, follow these steps: 1. Disconnect all cables from the

DIMM Removal and Installation (Mini Tower Chassis): OptiPlex GX1p DIMM Removal | DIMM Installation DIMM Removal   To remove a DIMM from 1 of the 3

VideoMemoryRemoval(MiniTowerChassis):Dell™OptiPlex™GX1p  To replace the video-memory upgrade module, follow these steps: 1. Remove the expa

SECCartridge/HeatSinkAssemblyRemoval(MiniTowerChassis):Dell™OptiPlex™GX1p  To remove the SEC cartridge/heat sink assembly, follow these st

System Battery Removal (Mini Tower Chassis): OptiPlex GX1p To remove the system battery, follow these steps: 1. If possible, boot the system and ent

FrontBezelRemoval(MiniTowerChassis):Dell™OptiPlex™GX1p  To remove the front bezel, follow these steps: 1. Press the tab release marked with

DMISupport/DellOpenManageClient:Dell™OptiPlex™GX1p Desktop Management Interface (DMI) support enables both the local and remote management of th

Eject,Power,andResetButtonRemoval(MiniTowerChassis):Dell™OptiPlex™GX1p  To remove the eject, power, and reset buttons, follow these steps

Front-PanelInsertRemoval(MiniTowerChassis):Dell™OptiPlex™GX1p  To remove a 5.25-inch front-panel insert, follow these steps: 1. Hold the bez

ControlPanelRemoval(MiniTowerChassis):Dell™OptiPlex™GX1p To remove the control panel, follow these steps: 1. Remove the hard-disk drive brack

Drive Hardware Removal (Mini Tower Chassis): OptiPlex GX1p Drive Hardware | 3.5-Inch Diskette-Drive Removal | 5.25-Inch Drive Assembly Removal | Hard-

When you replace the 3.5-inch diskette drive, be sure that the 2 hooks on the right side of the bracket engage the mounting holes in the side of the

Hard-Disk Drive Bracket Removal  To remove the hard-disk drive bracket, follow these steps: 1. Disconnect the DC power cable and the interface cabl

System Power-SupplyRemoval(MiniTowerChassis):Dell™OptiPlex™GX1p To remove the system power supply, follow these steps: 1. Disconnect the AC po

Expansion-CardCageRemoval(MiniTowerChassis):Dell™OptiPlex™GX1p  To remove the expansion-card cage, follow these steps: 1. Rotate the lever t

ExpansionCardRemoval(MiniTowerChassis):Dell™OptiPlex™GX1p To remove an expansion card, follow these steps: 1. Disconnect any cables from the

ChassisIntrusion:Dell™OptiPlex™GX1p If the Chassis Intrusion option is set to Enabled in the System Setup program and the system cover is removed,

Documentation:Dell™OptiPlex™GX1p HTML Documents | WinHelp Documents | PDF Documents | HTML Documents WinHelp Documents Online System Use

SystemSetup:Dell™OptiPlex™GX1p For detailed information on System Setup options, see "Using the System Setup Program" in the online Syst

SystemSetup:Dell™OptiPlex™GX1p See"UsingtheSystemSetupProgram"intheonlineSystem User's Guide. 

Documentation:Dell™OptiPlex™GX1p SistemaDellOptiPlexGX1pconCapacidaddemanipulaciónmejorada,GuíadelusuarioIndice (.hlp) Guíadereferen

Specifications:Dell™OptiPlex™GX1p General | System Information | Expansion Bus | System Clocks | Memory | Drives | Ports | Audio | Video | Support

System Clocks Diskette/communications ports48 MHz from system clockSystem clock66/100 MHz Keyboard controller48 MHzMemory Architecture72-bit (ECC), n

Internally accessible:Primary EIDE hard-disk drive 40-pin connector on PCI local busSecondary EIDE hard-disk drive 40-pin connector on PCI local busDi

Physical Midsize chassis:Weight 12.7 kg (28 lb)Height 16.5 cm (6.5 inches)Width 41.9 cm (16.5 inches)Depth 44.5 cm (17.5 inches)Mini tower chassis:We

APM 1.1-compliantFCC IDClass B EN 55022 (Czech Republic only)Category B VCCI Notice (Japan only)Class 1, Class 2 Korean Regulatory NoticeClass A, Clas

Hard-DiskDriveOptions:Dell™OptiPlex™GX1p The hard-disk drive assembly (consisting of the hard-disk drive and the hard-disk drive bracket) is loca

SystemBoard:Dell™OptiPlex™GX1p The GX1p system board supports a 500-MHz microprocessor.