Dell Dimension 5150C Bedienungsanleitung PDF herunterladen (Seite 62)

System SetupDell Dimension 5150C Service Manual

file:///T|/htdocs/systems/dim5150C/en/sm/syssetup.htm[10/31/2012 8:21:30 AM]

Fastboot

(On default)

Off — Does not skip any steps during computer startup.

On — Starts the system more quickly.

Numlock Key

(On default)

Determines the functionality of the numeric keys on the right side of your keyboard.

Off — Commands the right keypad keys to function as arrows.

On — Commands the right keypad keys to function as numbers.

POST Hotkeys

(Setup & Boot

Menu default)

Determines whether the sign-on screen displays a message stating the keystroke sequence that is

required to enter the Setup program or the Quickboot feature.

Setup & Boot Menu — Displays both messages

(F2=Setup and F12=Boot Menu).

Setup — Displays the setup message only (F2=Setup).

Boot Menu — Displays the Quickboot message only (F12=Boot Menu).

None — Displays no message.

Keyboard Errors

(Report

default)

When set to Report and an error is detected during POST, the BIOS will display the error message and

prompt you to press <F1> to continue or press <F2> to enter System Setup.

When set to Do Not Report (disabled) and an error is detected during POST, the BIOS will display the

error message and continue booting the system.

Boot Sequence

This feature allows you to change the boot sequence for devices.

NOTICE: If you modify any boot sequence settings, save the new settings to avoid losing the changes.

Option Settings

NOTE: The computer attempts to boot from all bootable devices listed in the boot sequence. If no bootable device is

detected the computer displays the error message No bootable devices. Press the <F1> key to retry the boot or press

the <F2> key to enter the setup utility.

Onboard or USB Floppy Drive — The computer attempts to boot from the floppy drive. If there is no floppy disk in

the drive, or there is no floppy drive installed, the computer attempts to boot from the next bootable device in the

sequence.

NOTE: If there is a non-bootable floppy disk in the drive, the computer generates an error message. Follow the

on-screen instructions to retry the boot.

Onboard SATA Hard Drive — The computer attempts to boot from the primary hard drive. If there is no operating

system on the drive, the computer attempts to boot from the next bootable device in the sequence.

Onboard or USB CD-ROM Drive — The computer attempts to boot from the CD-ROM drive. If there is no CD in the

drive, or if the CD in the drive is non-bootable, the computer attempts to boot from the next bootable device in the

sequence.

Onboard Network Controller — The computer attempts to boot from the network. If no network is detected, the

computer attempts to boot from the next bootable device in the sequence

NOTE: To boot from a network the onboard network controller must be set to On w/PXE.

USB Device — Insert the memory device into a USB port and restart the computer. When F12 = Boot Menu appears in

the upper-right corner of the screen, press the <F12> key. The BIOS detects the device and adds the USB flash option

to the boot menu.

1 2 ... 57 58 59 60 61 62 63 64 65

Kommentare zu diesen Handbüchern

Keine Kommentare

Dell Dimension 5150C Bedienungsanleitung Seite 62

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computers Dell Dimension 5150C