Dell Dimension 5150C Bedienungsanleitung PDF herunterladen (Seite 12)

Removing and Installing Parts: Dell Dimension 5150C Service Manual

file:///T|/htdocs/systems/dim5150C/en/sm/parts1.htm[10/31/2012 8:21:07 AM]

13. Click the General tab.

14. To verify that the memory is installed correctly, check the amount of memory (RAM) listed.

Removing Memory

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the

Product Information Guide.

NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body

before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface

on the computer chassis.

1. Follow the procedures in Before You Begin

2. Remove the computer cover

3. Press out the securing clip at each end of the memory module connector.

4. Grasp the module and pull up.

If the module is difficult to remove, ease the module back and forth to remove it from the connector.

Cards

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the

Product Information Guide.

NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body

before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface

on the computer chassis.

Your Dell™ computer provides the following slots for PCI Express cards:

One PCI Express x16 card slot

One PCI Express x1 card slot

NOTE: The slots for the PCI Express x16 and PCI Express x1 cards are half-height slots.

If you are installing or replacing a PCI Express card, follow the procedures in the next section. If you are removing but not

replacing a card, see "Removing a PCI Express Card

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 64 65

Keine Kommentare

Dell Dimension 5150C Bedienungsanleitung Seite 12