Dell FluidFS NAS Solutions NX3600/NX3610Deployment Guide
Figure 4. Dedicated SAN Solution in the Non-Redundant OptionAll-In-One High-Availability OptionIn an all-in-one high-availability option, the redundan
Figure 5. All-in-One High-Availability OptionAll-In-One Non-Redundant OptionIn an all-in-one non redundant option, both the SAN or internal and client
Figure 6. All-in-One Non-Redundant OptionPreparing Your Management StationA management station is required to manage and configure the NAS cluster sol
• The NAS Initial Deployment Utility (IDU) must be installed.NOTE: You can download and install the Dell NAS IDU from support.dell.com.• The NAS clust
14
2Running The NAS IDUThe Dell NAS Initial Deployment Utility (IDU) guides you through the steps necessary to set up the network configuration and pair
The NAS Initial Deployment Utility Screen is displayed.2. Click Next.The NAS Discovery screen is displayed.– All un-configured NAS appliances are disp
NOTE: If you select Advanced in the Network Configuration screen and enter the relevant IP addresses in the Client access network screen, the fields i
18
3Setting Up Your MD Storage SolutionThis section assumes you have discovered and completed the initial configuration (naming, assigning iSCSI, and man
Notes, Cautions, and WarningsNOTE: A NOTE indicates important information that helps you make better use of your computer.CAUTION: A CAUTION indicates
3. Start the Create Disk Group Wizard using one of the following methods:a) On the Logical tab, select Unconfigured Capacity, or right-click Unconfigu
NOTE: You can select multiple physical disks at the same time by holding Ctrl or Shift and selecting additional physical disks.To view the capacity of
5. Type the name of the new host group in Enter New Host Group Name (for example, PowerVault_NX3600).NOTE: Host group name must have 30 alphanumeric c
The second virtual disk you selected is added and the Logical unit number (LUN) (0–255) list is populated.9. Click Close.Creating Host-To-Virtual Disk
NOTE: The Security Alert window is displayed after you install the PowerVault NAS cluster solution, or after upgrading the system. Clicking Yes enable
4NAS Manager Configuration WizardThe NAS Manager Configuration Wizard helps complete the PowerVault NAS cluster solution configuration and integrate t
c) Read communityd) Trap recipientNOTE: Click Add to add multiple Trap recipients.12. Click Next.The Configuration Wizard (File System Formation) step
26. Click Next.The Configuration Wizard (Cross-protocol User Mapping) step 11 of 14 screen is displayed.27. To automatically map users in Active Direc
The Configuration Wizard (NFS export) step 14 of 14 screen with the existing NFS exports is displayed.43. To add additional NFS exports, click Add and
5PowerVault FluidFS NAS Setup WorksheetComplete the worksheet to record the layout of your PowerVault FluidFS NAS.Number of NAS Appliances 1 Number o
ContentsNotes, Cautions, and Warnings...21 Overview...
*Client VIP # 8 Use one IP for iSCSI Discovery in NAS IDUEnvironment Setup DNS Server IP SNMP Read CommunityNIS DomainDNS Suffix SNMP Trap Recipient N
6Getting HelpContacting DellNOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing
4
1OverviewSetting Up The EnvironmentTo set up the environment:1. Choose the topology and cable your solution.2. Complete the NAS system setup worksheet
Figure 1. The MD Switch TopologyMD32x0i controllers have four iSCSI data ports. Note the following when configuring the ports:• Ports 2 and 3 must not
Choosing The Switch TopologyThe PowerVault NX3600/NX3610 supports four switch topologies. The topologies are listed in the table with their benefits a
Figure 2. NX3600/NX3610 Controller NIC CablingNOTE: • NX3600 supports one NAS appliance and one MD storage array.• NX3610 supports up to two NAS appli
Figure 3. Dedicated SAN Solution in the High Availability OptionDedicated SAN Solution In The Non-Redundant OptionThe dedicated SAN solution in the no
Kommentare zu diesen Handbüchern