Dell PowerVault MD3860f Bedienungsanleitung PDF herunterladen (Seite 10)

Figure 4. Fibre/iSCSI Channel Multi-path Configuration

Switch Zoning Requirements

Switches used in a fibre-channel and iSCSI configuration must employ zoning. These switch zoning requirements must

be observed:

• Each host bus adapter (HBA) on the host server must connect to a separate switch zone; no more than one HBA may

be connected to one logical switch zone.

• Port 3 on each of the MD storage array controller is reserved for Remote Replication. This is required for fibre-

channel only. iSCSI does not require any dedicated port.

• For fibre-channel, a separate zone must be created for each Remote Replication port.

• No more than four data paths (port-to-port segments) can be established from a single, physical host server to a

single RAID controller.

For additional MD storage array zoning information, see the Deployment Guide for your array at dell.com/support.

For additional VMware-related zoning information, see

VMware Fibre Channel SAN Configuration Guide

at vmware.com/

support/product-support.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 32 33

Keine Kommentare

Dell PowerVault MD3860f Bedienungsanleitung Seite 10