Dell POWEREDGE M1000E Bedienungsanleitung PDF herunterladen (Seite 14)

8 Fabric OS Documentation Updates

53-1002063-03

portCfgFaultDelay

Configures the fault delay for a single FC port.

SYNOPSIS portcfgfaultdelay --enable [slot/]port mode

portcfgfaultdelay --help

DESCRIPTION Use this command to configure the fault delay of an FC port.

In the event that the link is noisy after a host power cycle, the switch may go into a soft fault state, which

means a delay of R_A_TOV. Setting the mode value to 1 reduces the fault delay value to 1.2 seconds.

The configuration is stored in nonvolatile memory and is persistent across switch reboots or power cycle.

Use the portCfgShow command to display user-configured fault delay settings.

NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in

place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for

details.

This command is not applicable to non-FC ports.

OPERANDS This command has the following operands:

slot For bladed systems only, specifies the slot number of the port to be configured,

followed by a slash (/).

port Specifies the number of the port to be configured, relative to its slot for bladed

systems. Use switchShow for a listing of valid ports.

mode Specifies the fault delay value for the port number. This operand is required. Valid

values are one of the following:

0 Sets the fault delay to R_A_TOV (default)

1 Sets the fault delay to 1.2 seconds.

---help Displays the command usage.

EXAMPLES To set the fault delay of a port to 1.2 seconds:

switch:admin> portcfgfaultdelay 2/3 1

To display the configuration

switch:admin> portcfgshow 2/3 1

Area Number: 138

Speed Level: AUTO(HW)

Fill Word: 0(Idle-Idle)

AL_PA Offset 13: OFF

Trunk Port ON

Long Distance OFF

VC Link Init OFF

Locked L_Port OFF

Locked G_Port OFF

Disabled E_Port OFF

ISL R_RDY Mode OFF

RSCN Suppressed OFF

Persistent Disable OFF

NPIV capability ON

QOS E_Port AE

Port Auto Disable: OFF

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 25 26

Kommentare zu diesen Handbüchern

Keine Kommentare

Dell POWEREDGE M1000E Bedienungsanleitung Seite 14

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Computerzubehör Dell POWEREDGE M1000E