Dell 9020 AIO Bedienungshandbuch PDF herunterladen (Seite 19)

Installing the Optical Drive

1. Place the optical-drive bracket on the optical drive.

2. Tighten the screws that secure the optical-drive bracket to the optical drive.

3. Align and slide the optical drive into its slot.

4. Connect the optical-drive cable.

5. Tighten the screws that secure the optical drive to the computer.

6. Install the:

a) back cover

b) VESA stand

7. Follow the procedures in

After Working Inside Your Computer

Removing the Hard Drive

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove the:

a) VESA stand

b) back cover

c) VESA mount bracket

3. Unthread the cables from the notches on the hard-drive bracket. Disconnect the hard-drive cables from the hard

drive.

4. Remove the screw that secures the hard-drive bracket to the system board. Slide and lift the hard-drive bracket

away from the computer.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 62 63

Keine Kommentare

Dell 9020 AIO Bedienungshandbuch Seite 19