Dell 9020 AIO Bedienungshandbuch PDF herunterladen (Seite 22)

Installing the Intrusion Switch

1. Place the intrusion switch on the computer and tighten the screw to secure it to the chassis.

2. Thread the cable along the notches on the chassis and connect the intrusion-switch cable to the connector on the

system board.

3. Install:

a) system-board shield

b) VESA mount bracket

c) back cover

d) VESA stand

4. Follow the procedures in

After Working Inside Your Computer

Removing the Wireless Local Area Network (WLAN) Card

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove the:

a) VESA stand

b) back cover

c) VESA mount bracket

d) system-board shield

3. Disconnect the WLAN antenna cables and remove the screws that secure the WLAN card to the system board.

Remove the WLAN card from the connector.

4. Flip the WLAN card and remove the screws that secure the WLAN card to the WLAN adapter. Remove the WLAN

card from the adapter.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 62 63

Keine Kommentare

Dell 9020 AIO Bedienungshandbuch Seite 22