Dell W-IAP103 Betriebsanweisung

Reference GuideDell Networking W-SeriesInstant 6.4.0.2-4.1 Command-Line Interface

10 | Instant CLI Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand Line EditingThe system records your most recently entered c

100 | hotspot anqp-roam-cons-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidehotspot anqp-roam-cons-profilehotspot anqp-roam

Command InformationW-IAP Platform Command ModeAll platformsConfiguration mode and the ANQP roaming consortium profileconfiguration sub-modeDell Networ

102 | hotspot anqp-venue-name-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidehotspot anqp-venue-name-profilehotspot anqp-ve

Parameter Description Range Defaultvenue-name<name>Configures the venuename to be advertised inthe ANQP IEs. If the venuename includes spaces, t

104 | hotspot anqp-venue-name-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideVenue Group Associated Venue Type Valueeducati

(Instant AP)(venue-name "Mall1")# end(Instant AP)# commit applyCommand HistoryVersion DescriptionDell Networking W-Series Instant 6.2.1.0-3.

106 | hotspot h2qp-conn-cap-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidehotspot h2qp-conn-cap-profilehotspot h2qp-conn-c

Usage GuidelinesUse this command to configure the values to be sent in an ANQP IE to provide information about the IP protocolsand associated port num

108 | hotspot h2qp-oper-name-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidehotspot h2qp-oper-name-profilehotspot h2qp-oper

Command InformationW-IAP Platform Command ModeAll platformsConfiguration mode and the H2QP operator friendly name profileconfiguration sub-modeDell Ne

Specifying Addresses and Identifiers in CommandsThis section describes addresses and other identifiers that you can reference in CLI commands.Address/

110 | hotspot h2qp-oper-class-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidehotspot h2qp-oper-class-profilehotspot h2qp-op

hotspot h2qp-wan-metrics-profilehotspot h2qp-wan-metrics-profile <profile-name>at-capacitydownlink-load <load>downlink-speed <speed>

112 | hotspot h2qp-wan-metrics-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideParameter Description Range Defaultuplink-spe

hotspot hs-profilehotspot hs-profile <profile-name>access-network-type <type>addtl-roam-cons-ois <addtl-roam-cons-ois>advertisement-

114 | hotspot hs-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideParameter Description Range DefaultInternet based on paymen

Parameter Description Range Defaulth2qp-wan-metrics}l h2qp-conn-capl h2qp-oper-classl h2qp-oper-namel h2qp-wan-metrics<profile-name>Allows you t

116 | hotspot hs-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideParameter Description Range DefaultnoRemoves any existingco

Parameter Description Range Defaultroam-cons-oi-1roam-cons-oi-2roam-cons-oi-3Configures the roaming consortiumOI to assign to one of the serviceprovid

118 | hotspot hs-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidel Network discovery and selection— Allows the clients to di

l roam-cons-oi-3 and roam-cons-len 3The configurable values for each additional OI include the Organization Identifier itself, the OI length, and the

12 | aaa test-server Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideaaa test-serveraaa test-server <servername> <username&

120 | hotspot hs-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideVenue Group Associated Venue Type ValueThe associated numer

(Instant AP)# commit applyThe following commands associate anqp-3gpp advertisement profile with a hotspot profile:(Instant AP)(config)# hotspot hs-pro

122 | iap-master Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideiap-masteriap-masterno…DescriptionThis command provisions a W-IAP a

idsidsclient-detection-level <type>client-protection-level <type>detect-adhoc-networkdetect-ap-flooddetect-ap-impersonationdetect-ap-spoof

124 | ids Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideSyntaxParameter Description Range DefaultidsCreates an IDS policy — —clien

Parameter Description Range Defaultdetect-eap-rate-anomalyEnables Extensible AuthenticationProtocol (EAP) handshake analysis todetect an abnormal numb

126 | ids Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideParameter Description Range Defaultdetect-power-save-dos-attackEnables det

Parameter Description Range Defaultbridgingrogue-containmentControls Rogue APs. When rogue APsare detected, they are not automaticallydisabled.This op

128 | ids Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidel Client Detection Policies— Specifies the policy for detecting wireless a

(Instant AP)(IDS)# detect-tkip-replay-attack(Instant AP)(IDS)# signature-airjack(Instant AP)(IDS)# signature-asleap(Instant AP)(IDS)# protect-ssid(Ins

a-channela-channel <channel> <tx-power>DescriptionThis command configures 5 GHz radio channels for a specific W-IAP.SyntaxParameter Descri

130 | ignore-image-check Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideignore-image-checkignore-image-checkDescriptionThis command

inactivity-ap-timeoutinactivity-ap-timeout <seconds>no…DescriptionThis command configures the timeout interval for inactive user sessions.Syntax

132 | inbound-firewall Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideinbound-firewallinbound-firewallrule <subnet> <smask

Command/Parameter Description Range DefaultNAT on packets.src-natAllows the W-IAP to perform source NATon packets. When configured, the sourceIP chang

134 | inbound-firewall Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideExampleThe following example configures inbound firewall rule

internal-domainsinternal-domainsdomain-name <domain-name>no...DescriptionThis command configures valid domain names for the enterprise network.S

136 | ip-address Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideip-addressip-address <ip-address> <subnet-mask> <nex

ip dhcpip dhcp <dhcp_profile>bid <bid>client-count <idx>default-router <default_router>dhcp-relaydhcp-server <dhcp_server&g

138 | ip dhcp DellNetworking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideParameter Description Range Defaultallocated to a branch. The W-IAP doe

Parameter Description Range Defaultentered in the field determines theexclusion range of the subnet. Based onthe size of the subnet, the IP addressest

14 | a-external-antenna Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidea-external-antennaa-external-antenna <gain>Description

140 | ip dhcp DellNetworking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideParameter Description Range Default<server_type>assignment modes:

controller serving the VLAN/GRE of the client. This DHCP assignment mode also allows you to add the DHCPoption 82 to the DHCP traffic forwarded to the

142 | ip dhcp pool Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideip dhcp poolip dhcp pooldns-server <IP-address>domain-name

Command HistoryVersion DescriptionDell Networking W-Series Instant 6.2.1.0-3.3This command is introduced.Command InformationW-IAP Platform Command Mod

144 | l2tpv3 session Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidel2tpv3 sessionl2tpv3 session <l2tpv3_session_profile>cook

(Instant AP)(L2TPv3 Session Profile "test_session")# l2tpv3 tunnel test_tunnel(Instant AP)(L2TPv3 Session Profile "test_session")#

146 | l2tpv3 tunnel Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidel2tpv3 tunnell2tpv3 tunnel <l2tpv3_tunnel_profile>backup p

Parameter Description Range Defaultmessage-digest-type<digest_algo>Configures the messagedigest to be used to createthe MD AVP.MD5, SHA1, none M

148 | l3-mobility Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidel3-mobilityl3-mobilityhome-agent-load-balancingvirtual-controller

(Instant AP)(config)# l3-mobility(Instant AP)(L3-mobility)# home-agent-load-balancing(Instant AP)(L3-mobility)# virtual-controller 192.0.2.1(Instant A

Command HistoryVersion DescriptionDell Networking W-Series Instant 6.2.1.0-3.3This command is introduced.Command InformationW-IAP Platform Command Mod

150 | led-off Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideled-offled-offno…DescriptionThis command disables LED display on a W-I

logoutlogoutDescriptionThis command logs you out of the current CLI session.Usage GuidelinesUse this command to log out of the current CLI session and

152 | mas-integration Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidemas-integrationmas-integrationno…DescriptionThis command enabl

Command HistoryVersion DescriptionDell Networking W-Series Instant 6.2.1.0-3.3This command is introduced.Command InformationW-IAP Platform Command Mod

154 | mesh Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidemeshmeshno…DescriptionThis command sets up mesh network on a W-IAP.Syntax

Command InformationW-IAP Platform Command ModeAll platformsConfiguration modeDell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide mesh |

156 | mgmt-accounting Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidemgmt-accountingmgmt-accounting command allno…DescriptionThis c

mgmt-auth-servermgmt-auth-server <server>no…DescriptionThis command configures authentication servers for management user interface of the Virtu

158 | mgmt-auth-server-load-balancing Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidemgmt-auth-server-load-balancingmgmt-auth-serve

mgmt-auth-server-local-backupmgmt-auth-server-local-backupno…DescriptionConfigures a secondary internal authentication server that will validate the m

16 | aeroscout-rtls Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideaeroscout-rtlsaeroscout-rtls <IP-address> <Port> [in

160 | mgmt-user Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidemgmt-usermgmt-user <username> [<password>][<type>]

namename <name>DescriptionThis command configures a unique name for the W-IAP.SyntaxParameter Descriptionname <name>Configures a name for

162 | ntp-server Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidentp-serverntp-server <Name>no…DescriptionThis command configu

opendnsopendns <user> <password>no...DescriptionThis command configures OpenDNS credentials for filtering content and to create Internet a

164 | organization Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideorganizationorganization <name>no…DescriptionThis command c

Command InformationW-IAP Platform Command ModeAll platformsConfiguration modeDell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide organi

166 | ping Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidepingping <host>DescriptionThis command sends ICMP echo packets to t

pppoe-uplink-profilepppoe-uplink-profile <profile>pppoe-username <username>pppoe-passwd <password>pppoe-svcname <svcname>pppoe

168 | pppoe-uplink-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand HistoryVersion DescriptionDell Networking W-Serie

proxyproxy {exception <host>| server <host> <port>}DescriptionThis command configures HTTP proxy settings.SyntaxParameter Descriptio

airgroupairgroupcppm enforce-registrationcppm-query-interval <interval>cppm-server <server-name>disableenable [dlna-only| mdns-only]enable

170 | reload Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidereloadreload <all>DescriptionThis command performs a reboot of th

Command InformationW-IAP Platform Command ModeAll platformsPrivileged EXEC modeDell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide relo

172 | remove-blacklist-client Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideremove-blacklist-clientremove-blacklist-client <MAC

restrict-corp-accessrestrict-corp-accessno…DescriptionThis command configures restricted access to the corporate network.SyntaxParameter Descriptionno

174 | restricted-mgmt-access Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guiderestricted-mgmt-accessrestricted-mgmt-access <subnet

rf dot11a-radio-profilerf dot11a-radio-profilebeacon-interval <interval>csa-count <count>dot11hinterference-immunity <immunity-level>

176 | rf dot11a-radio-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideParameter Description Range Defaultrecommended for env

Command HistoryVersion DescriptionDell Networking W-Series Instant 6.3.1.1-4.0 This command is modified.Dell Networking W-Series Instant 6.2.1.0-3.3Th

178 | rf dot11g-radio-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guiderf dot11g-radio-profilerf dot11g-radio-profilebeacon-i

Parameter Description Range Defaultinterference related to 2.4 GHz appliancessuch as cordless phones.l Level 4— Level 3 settings, and FIRimmunity. At

18 | airgroup Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideParameter Description Range Defaultmulti-swarmEnables inter cluster mo

180 | rf dot11g-radio-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand HistoryVersion DescriptionDell Networking W-Se

rf-bandrf-band {2.4| 5.0| all}DescriptionThis command configures the radio frequency band for a W-IAP.SyntaxParameter Description Range Defaultrf-band

182 | rft Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guiderftrft test profileantenna-connectivity ip-addr <IP-addr> dest-mac &

Command InformationW-IAP Platform Command ModeAll platforms except W-IAP224/225,and W-IAP274/275Privileged EXEC modeDell Networking W-Series Instant 6

184 | routing-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guiderouting-profilerouting-profileroute <destination> <ma

show 1xcertshow 1xcertDescriptionThis command displays the details about the external server certificate, which is used by the W-IAP for clientauthent

186 | show about Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow aboutshow aboutDescriptionThis command displays information ab

show access-ruleshow access-rule <name>DescriptionThis command displays the details of access rules configured for the wired or wireless clients

188 | show access-rule Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide---- ---------------------- - ----- ------- -------------Vlan

show access-rule-allshow access-rule-allDescriptionThis command displays the details of the access rules configured for all wired and wireless profile

airgroupserviceairgroupservice <airgroupservice>description <description>disabledisallow-role <role>disallow-vlan <VLAN-ID>ena

190 | show access-rule-all Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideParameter DescriptionAccess Rule NameDisplays the name of

show airgroupshow airgroup {blocked-queries [dlna| mdns]| blocked-service-id [dlna| mdns]| cache {<MAC-address> | entries [dlna| mdns]} | cppm {

192 | show airgroup Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow airgroup blocked-queriesThe show airgroup blocked-queries c

All Airgroup Non-CoA-only Servers known to MDNS-----------------------------------------------Server IP-Address Port timeout rfc3576 rfc3576-only rfc3

194 | show airgroup Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideColumn Descriptionswarm idIndicates the cluster ID of the W-IAP.

mdns apdb init counter 7(7)mdns apdb destroy counter 1(1)user timed out 1(1)airgroup restore count 1(1)mdns mac move counter 4(4)mdns master to vc hel

196 | show airgroup Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideQuery - resp pkt gen & send 0 0 0 0Query - Response packet s

show airgroup statusThe following output is displayed for the show airgroup status command:AirGroup Feature----------------Status------DisabledAirGrou

198 | show airgroup Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideColumn DescriptionAirGroup Guest MulticastIndicates if a guest V

Column DescriptionWired/WirelessDisplays if the AirGroup user is connected to a wired or wireless interface.RoleIndicates the AirGroup user role.Usern

0511587-01 | June 2014 Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCopyright© 2014 Aruba Networks, Inc. Aruba Networks trademark

20 | airgroupservice Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideParameter Description Defaultdisallow-vlan <VLAN-ID>Restr

200 | show airgroupservice Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow airgroupserviceshow airgroupservice [disallow {role|

_rfb. _tcp_net- assistant._tcpAirGroupService Details-----------------------Service Description status Disallowed-Role Disallowed-VLAN ID------- -----

202 | show airgroupservice Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand InformationW-IAP Platform Command ModeAll platfor

show airgroupservice-idsshow airgroupservice-ids <service>DescriptionThis command displays the AirGroup service IDs configured on a W-IAP for it

204 | show acl Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow aclshow acl {domains}DescriptionThis command displays the Access

show aleshow ale {config| status}DescriptionThis command displays the ALE configuration details.SyntaxParameter DescriptionconfigDisplays the ALE conf

206 | show ale Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand InformationW-IAP Platform Command ModeAll platformsPrivileged

show alert globalshow alert global [count]DescriptionThis command displays the list of client alerts for a W-IAP.SyntaxParameter Description<count&

208 | show alg Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow algshow algDescriptionThis command displays the Application Laye

show allowed-apsshow allowed-apsDescriptionThis command displays the list of W-IAPs that are allowed to join the W-IAP cluster.Usage GuidelinesUse thi

airwave-rtlsairwave-rtls <IP-address> <Port> <key> <frequency> [include-unassoc-sta]no…DescriptionThis command integrates W-Ai

210 | show all monitor DellNetworking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow all monitorshow all monitor active-laser-beamsDescription

show amp-auditshow amp-auditDescriptionThis command displays the set of configurations on the W-AirWave Management Platform.Usage GuidelinesUse this c

212 | show amp-audit DellNetworking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide3gpp-plmn1 "40486"3gpp-plmn2 ""3gpp-plmn3 &q

max-authentication-failures 0vlan 200rf-band allcaptive-portal disablemac-authenticationl2-auth-failthroughdtim-period 1inactivity-timeout 1000broadca

214 | show amp-audit DellNetworking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidedescription AirPlayairgroupservice airprintdisabledescription Ai

show ap-envshow ap-envDescriptionThis command displays all provisioned AP parameters such as the type of antenna used by a. The output of thiscommand

216 | show aps Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow apsshow aps [scanning][sync]DescriptionThis command displays all

Column DescriptionMesh RoleIndicates if the W-IAP is functioning as Mesh Point or mesh Portal.2.4 ChannelIndicates the channels used by the W-IAP in t

218 | show aps Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideAP Sync List------------MAC IP Address Class Current Version--- -----

show ap allowed-channelsshow ap allowed-channels <country-code>DescriptionThis command displays a list of allowed channels for a W-IAP.SyntaxPar

22 | ale-report-interval Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideale-report-intervalale-report-interval <seconds>no…De

220 | show ap allowed-channels Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand InformationW-IAP Platform Command ModeAll pla

show ap allowed-max-EIRPshow ap allowed-max-EIRP [<country>]DescriptionThis command displays the maximum EIRP settings for the country in which

222 | show ap arm Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow ap armshow ap arm {bandwidth-management | history | neighbors

Column DescriptionClientDisplays the list of W-IAP clients connected through the Wi-Fi interface.Tx PktDisplays the transmission packet details associ

224 | show ap arm Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide2013-05-10 09:04:24 149+ 157+ 27 27 I2013-05-10 06:08:59 157+ 149+

show ap arm neighborsThe show ap arm neighbors command displays the ARM settings on the W-IAP neighbors. The following exampleshows the output of the

226 | show ap arm Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide60 0 0 0 93 0/0/0/0/94 0/0(0) 29/14//0/0(43)64 0 0 0 93 6/0/0/0/94

Column Descriptiondetected by the neighboring APs on that channel.intf_idx(TotalDisplays channel interference details. The W-IAP uses this metric to m

228 | show ap arm Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide149 68631720 952 0 0 DVACFT 172074153 32278480 1268 0 0 DVACPT 172

Column Descriptionchannel(under WIFI ScanningState)Indicates the channels available on the Wi-Fi interface.current-scan-channelIndicates the current c

ale-serverale-server <server>no…DescriptionThis command configures Analytics and Location Engine (ALE) server details for W-IAP integration with

230 | show ap association Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow ap associationshow ap associationDescriptionThis comm

Column Descriptiontunnel-idIndicates the identification number of the W-IAP tunnel.assoc. timeIndicates the amount of time the client has been associa

232 | show ap bss-table Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow ap bss-tableshow ap bss-tableDescriptionThis command di

Column Descriptionch/EIRP/max-EIRPDisplays the radio channel used by the AP/current effective Isotropic Radiated Power(EIRP) /maximum EIRP.curDisplays

234 | show ap client-match-history Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow ap client-match-historyshow ap client-match-

Command HistoryVersion DescriptionDell Networking W-SeriesInstant 6.3.1.1-4.0This command is introduced.Command InformationW-IAP Platform Command Mode

236 | show ap client-match-live Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow ap client-match-liveshow ap client-match-liveDe

show ap client-probe-reportshow ap client-probe-report [<radio>]DescriptionThis command displays the client probe report for a W-IAP.SyntaxParam

238 | show ap client-probe-report Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide00:21:6a:ba:b7:ce 31 No 2s04:0c:ce:e1:98:78 50 No

show ap client-match-refusedshow ap client-match-refused [<radio>]DescriptionThis command displays the list of clients for which the channel all

24 | alg Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidealgalgsccp-disablesip-disablevocera-disableno…DescriptionThis command allow

240 | show ap client-match-refused Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand HistoryVersion DescriptionDell Networking

show ap client-match-triggersshow ap client-match-triggersDescriptionThis command displays the configuration conditions that trigger client match even

242 | show ap client-match-triggers Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand InformationW-IAP Platform Command ModeAl

show ap client-viewshow ap client-viewDescriptionThis command displays information about the clients in the AP neighborhood.Usage GuidelinesUse this c

244 | show ap client-view Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand InformationW-IAP Platform Command ModeAll platform

show ap debug airwaveshow ap debug airwaveDescriptionThis command displays the list of W-AirWave servers configured on a W-IAP.Usage GuidelinesUse thi

246 | show ap debug airwave-config-received Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow ap debug airwave-config-receivedsho

show ap debug airwave-data-sentshow ap debug airwave-data-sentDescriptionThis command displays information about data exchange between the W-AirWave s

248 | show ap debug airwave-events-pending Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow ap debug airwave-events-pendingshow

show ap debug airwave-signon-keyshow ap debug airwave-signon-keyDescriptionThis command displays the W-AirWave sign on key used by the used by the adm

allow-new-apsallow-new-apsno…DescriptionThis command allows the new access points to join the W-IAP cluster.SyntaxCommand/Parameter Descriptionallow-n

250 | show ap debug airwave-state Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow ap debug airwave-stateshow ap debug airwave-s

<e47>93</e47><e46>3</e46></t3><t3><e1>d8:c7:c8:c4:29:80</e1><e23>1</e23><e24>22</

252 | show ap debug airwave-stats Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow ap debug airwave-statsshow ap debug airwave-s

show ap debug am-configshow ap debug am-configDescriptionThis command displays the information required for debugging a W-IAP.SyntaxParameter Descript

254 | show ap debug am-config Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideFrame Receive Error Rate Low Watermark 0Frame Retry Ra

show ap debug auth-trace-bufshow ap debug auth-trace-buf [<Mac>]DescriptionThis command displays the trace buffer for authentication events asso

256 | show ap debug auth-trace-buf Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand InformationW-IAP Platform Command ModeAll

show ap debug client-matchshow ap debug client-match <radio>DescriptionThis command displays the information about the client match configuratio

258 | show ap debug client-stats DellNetworking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow ap debug client-statsshow ap debug client-stats

Rx Mgmt Frames 1PS Poll Frames 0Rx 6 Mbps 14Rx 12 Mbps 6Rx 18 Mbps 5Rx 24 Mbps 2Rx 36 Mbps 13Rx 48 Mbps 1162Rx 54 Mbps 1730Rx WMM [BE] 39The output of

26 | allowed-ap Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideallowed-apallowed-ap <MAC-address>no…DescriptionThis command a

260 | show ap debug client-stats DellNetworking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideParameter DescriptionLast SNR CTL0Indicates the sign

Command HistoryVersion DescriptionDell Networking W-Series Instant 6.2.1.0-3.3This command is introduced.Command InformationW-IAP Platform Command Mod

262 | show ap debug client-table Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow ap debug client-tableshow ap debug client-tabl

Parameter DescriptionUAPSDShows the following values for Unscheduled Automatic Power Save Delivery (UAPSD) incomma-separated format: VO, VI, BK, BE, M

264 | show ap debug crash-info Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow ap debug crash-infoshow ap debug crash-infoDescr

show ap debug dhcp-packetsshow ap debug dhcp-packetsDescriptionThis command displays information about the DHCP packets sent or received by a W-IAP.Us

266 | show ap debug dot1x-statistics Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow ap debug dot1x-statisticsshow ap debug dot

Command HistoryVersion DescriptionDell Networking W-Series Instant6.2.1.0-3.3This command is introduced.Command InformationW-IAP Platform Command Mode

268 | show ap debug driver-config DellNetworking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow ap debug driver-configshow ap debug driver-con

CSD override EnabledAdvertise 802.11K Capability DisabledMeasurement Mode for Beacon Reports passiveChannel for Beacon Requests in 'A' band

ams-backup-ipams-backup-ip <IP-address or domain name>no…DescriptionThis command adds the IP address or domain name of the backup W-AirWave Mana

270 | show ap debug driver-config DellNetworking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideMax transmitted A-MPDU size 65535 bytesMin MPDU sta

show ap debug mgmt-framesshow ap debug mgmt-frames <mac>DescriptionThis command displays the trace information for the 802.11 management frames.

272 | show ap debug mgmt-frames Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand InformationW-IAP Platform Command ModeAll pl

show ap debug persistent-clientsshow ap debug persistent-clientsDescriptionThis command displays the information about the persistent W-IAP clients.Us

274 | show ap debug radio-stats Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow ap debug radio-statsshow ap debug radio-stats [

Tx Data Bytes 108 Mbps (Mon) 0RADIO Stats-----------Parameter Value--------- -----Tx Data Bytes 108 Mbps+ (Mon) 0Tx 6 Mbps 557650Tx WMM [BE] 125Tx WMM

276 | show ap debug radio-stats Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand InformationW-IAP Platform Command ModeAll pl

show ap debug radius-statisticsshow ap debug radius-statisticsDescriptionThis command displays the RADIUSstatistics for the authentication servers co

278 | show ap debug shaping-table Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow ap debug shaping-tableshow ap debug shaping-t

Column Descriptionlast-tShows the number of tokens that were allocated to the station last time tokenallocation algorithm ran.inShows the number of pa

28 | ams-identity Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideams-identityams-identity <Name>DescriptionThis command uniqu

280 | show ap debug spanning-tree Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow ap debug spanning-treeshow ap debug spanning-

show ap debug stm-configshow ap debug stm-configDescriptionThis command displays the W-IAP station management configuration information.Usage Guidelin

282 | show ap debug system-status Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow ap debug system-statusshow ap debug system-st

show ap dot11k-beacon-reportshow ap dot11k-beacon-report <mac>DescriptionThis command displays the beacon report details for the 802.11k clients

284 | show ap dot11k-nbrs Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow ap dot11k-nbrsshow ap dot11k-nbrsDescriptionThis comm

show ap flash-configshow ap flash-configDescriptionThis command shows the statistics of the W-IAP configuration stored in flash memory.Usage Guideline

286 | show ap mesh counters Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow ap mesh countersshow ap mesh counterDescriptionThis

Column DescriptionEcho SentNumber of echo packets sent.Echo RecvNumber of echo packets received.Probe ReqNumber of probe request packets sent from the

288 | show ap mesh link Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow ap mesh linkshow ap mesh linkDescriptionThis command sh

Parameter Descriptionand the amount of time that relationship has existed.l P = Parentl C = Childl N = Neighborl B = Blacklisted-neighborFlagsThis par

ams-ipams-ip <IP-address or domain name>no…DescriptionThis command configures the IP address or domain name of the W-AirWave Management console

290 | show ap mesh neighbors Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow ap mesh neighborsshow ap mesh neighborsDescription

Parameter Descriptionl P = Parentl C = Childl N = Neighborl B = Blacklisted-neighborFlagsThis parameter shows additional information about the mesh ne

292 | show ap monitor Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow ap monitorshow ap monitor {active-laser-beams|ap-list|ap-

Parameter Descriptionl num-beacons: Number of beacons seen during a 10-second scanl tot-beacons: Total number of beacons seen since the last reset.l n

294 | show ap monitor Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide6c:f3:7f:b6:74:22 syelburgi 1 interfering 80211b/g-HT-20 disab

show ap monitor ids-stateUse this command to view information about the Intrusion Detection System (IDS) the following detection polices:l Detect Bloc

296 | show ap monitor Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide60:67:20:5b:33:28 00:1a:1e:17:d4:a1 00:00:00:00:00:00 00:00:00

(Instant AP)# show ap monitor stats d8:c7:c8:cb:d4:22Aggregate Stats---------------retry low-speed non-unicast recv-error frag bwidth----- --------- -

298 | show ap monitor Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideaverage 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40high 40 40

oui---RTLS Configuration and State-----------------------------Type Server IP Port Freq Active Rpt-Tags Tag-Mcast-Addr Tags-Sent Rpt-Sta Incl-Unassoc-

Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide About this Guide | 3Chapter 1About this GuideThis document describes the Dell Netwo

30 | ams-key Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideams-keyams-key <key>no…DescriptionThis command assigns a shared k

300 | show ap pmkcache Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow ap pmkcacheshow ap pmkcacheDescriptionThis command displ

show ap virtual-beacon-reportshow ap virtual-beacon-reportDescriptionThis command displays a report with the MAC address details and RSSI information

302 | show ap virtual-beacon-report Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand InformationW-IAP Platform Command ModeAl

show ap-alertshow ap-alert <count>DescriptionThis command displays all the alerts received for the specified APs.Usage GuidelinesUse this comman

304 | show app-services Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow app-servicesshow app-servicesDescriptionThis command di

smtp 6 25 25snmp 17 161 161snmp-trap 17 162 162ssh 6 22 22svp 119 0 65535syslog 17 514 514telnet 6 23 23tftp 17 69 69vocera 17 5002 5002The output of

306 | show arm-channels Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow arm-channelsshow arm-channelsDescriptionThis command di

157+ enableThe output of this command provides the following information:Parameter DescriptionChannelDisplays the list of channels available in the 2.

308 | show arm config Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow arm configshow arm configDescriptionThis command displays

60 enable64 enable149 enable153 enable157 enable161 enable165 enable36+ enable44+ enable52+ disable60+ disable149+ enable157+ enableThe output of this

applyapply {cplogo-install| cplogo-uninstall| debug-command| delta-config}DescriptionThis command is used to save or apply the configuration settings

310 | show arm config Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand InformationW-IAP Platform Command ModeAll platformsPri

show arpshow arpDescriptionThis command displays the Address Resolution Protocol (ARP) entries for the Virtual Controller.Usage GuidelinesUse this com

312 | show attack Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow attackshow attack {config| stats}DescriptionThis command disp

Command InformationW-IAP Platform Command ModeAll platformsPrivileged EXEC modeDell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide show

314 | show auth-survivability Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow auth-survivabilityshow auth-survivability {cached

Command InformationW-IAP Platform Command ModeAll platformsPrivileged EXEC modeDell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide show

316 | show backup-config Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow backup-configshow backup-configDescriptionThis command

blacklist-time 3600auth-failure-blacklist-time 3600ids classificationidswireless-containment noneairgroupdisableairgroupservice airplaydisabledescript

318 | show blacklist-client Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow blacklist-clientshow blacklist-client [config]Descr

Parameter DescriptionManually Blacklisted clientsDisplays the details of clients that are blacklisted manually.Dynamically Blacklisted ClientsDisplays

32 | arm Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidearmarm80mhz-supporta-channels <a-channel>air-time-fairness-mode {<

320 | show calea config Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow calea configshow calea configDescriptionThis command di

show calea statisticsshow calea statisticsDescriptionThis command displays the tunnel encapsulation statistics for a W-IAP.Usage GuidelinesUse this co

322 | show captive-portal Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow captive-portalshow captive-portalDescriptionThis comm

Parameter DescriptionServerDisplays the external Captive port server.URLDisplays the URL of the external captive portal splash page server.Authenticat

324 | show captive-portal-domains Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow captive-portal-domainsshow captive-portal-dom

show cellularshow cellular {config | status}DescriptionThese commands display the status and cellular configuration of the W-IAP.SyntaxParameter Descr

326 | show cellular Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideUSCanadaSupported ISP list------------------ISP list--------Cinc

---- ------ ----Not-present Not-detect LinkdownThe output of this command includes the following parameters:Parameters DescriptionCardIndicates if the

328 | show cert all Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow cert allshow cert allDescriptionThis command displays the d

show clientsshow clients [<diff>| accounting <mac>| checksum <mac>| debug| roaming| status <mac>| wired[debug]]DescriptionThis

Command/Parameter Description Range DefaultGHz band than on the 2.4 GHz band. Youcan configure any of the following band-steering modes:l prefer-5ghz

330 | show clients Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideColumn DescriptionNameDisplays the name of the clientIP addressDi

00 8aacct_session00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0000 00 00 00 00 00 00 00 00user_role00 00

332 | show clients Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand HistoryVersion DescriptionDell Networking W-SeriesInstant

show clockshow clock [summer-time| timezone all]DescriptionThis command displays the system clock, current timezone, and the daylight saving time conf

334 | show clock Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideParameter DescriptionCountryDisplays the country name.TimezoneDispl

Command HistoryVersion DescriptionDell Networking W-Series Instant6.2.1.0-3.3This command is introduced.Command InformationW-IAP Platform Command Mode

336 | show configuration Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow configurationshow configurationDescriptionThis command

nai-realm-eap-method eap-ttlsnai-realm-auth-id-1 non-eap-inner-authnai-realm-auth-value-1 mschapv2nai-realm-auth-id-2 credentialnai-realm-auth-value-2

338 | show configuration Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidecaptive-portal disabledtim-period 1inactivity-timeout 1000b

native-vlan 1shutdownaccess-rule-name default_wired_port_profilespeed autoduplex fullno poetype employeecaptive-portal disableno dot1xenet0-port-profi

34 | arm Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand/Parameter Description Range Defaulterror, 2—information,3—debug,4—d

340 | show config-status Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow config-statusshow config-statusDescriptionThis command

show console-settingsshow console-settingsDescriptionThis command displays the details about the console settings of a W-IAP.Usage GuidelinesUse this

342 | show country-codes Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow country-codesshow country-codesDescriptionThis command

SK:Slovak RepublicSI:SloveniaTH:ThailandUY:UruguayPA:PanamaRU:RussiaEG:EgyptTT:Trinidad and TobagoTR:TurkeyCR:Costa RicaEC:EcuadorHN:HondurasKE:KenyaU

344 | show country-codes Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand InformationW-IAP Platform Command ModeAll platforms

show cpcertshow 1xcertDescriptionThis command displays the details of the captive portal server certificate, which is used by the W-IAP for guestauthe

346 | show cpu Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow cpushow cpu [details]DescriptionThis command displays the CPU de

Command HistoryVersion DescriptionDell Networking W-Series Instant6.2.1.0-3.3This command is introduced.Command InformationW-IAP Platform Command Mode

348 | show datapath Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow datapathshow datapath {acl <ID>|acl-all|acl-allocatio

Datapath ACL 3 Entries-----------------------Flags: P - permit, L - log, E - established, M/e - MAC/etype filterS - SNAT, D - DNAT, R - redirect, r -

Command/Parameter Description Range Defaultfrequency bandwidth available for datatransmission. For high performance, enter5GHz. If the AP density is l

350 | show datapath Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide---- ---------- ---------------105 3200 32103 3234 16107 3250 32

3: 192.168.10.0 255.255.254.0 224.0.0.0 224.0.0.0 any PT44: 192.168.10.0 255.255.254.0 any any PST45: any any any PT4---------------------------------

352 | show datapath Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide-------- ----------------------dev3 1dev11 1dev12 1dev13 1dev14

Counter Value------- ------Tagged frames dropped on untagged interface 0Frames dropped for being too short 0Frames received on port not in VLAN 0Non-d

354 | show datapath Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow datapath userThe following example shows the partial output

Command InformationW-IAP Platform Command ModeAll platformsPrivileged EXEC modeDell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide show

356 | show delta-config Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow delta-configshow delta-config cfgidDescriptionThis comm

show derivation-rulesshow derivation-rulesDescriptionThis command displays the list of role and VLAN derivation rules configured for the WLAN SSIDs an

358 | show dhcp-allocation Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow dhcp-allocationshow dhcp-allocationDescriptionThis c

show dhcpc-optsshow dhcpc-optsDescriptionThis command displays the DHCP options configured on a W-IAP.Usage GuidelinesUse this command to view the cur

36 | attack Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideattackattackdrop-bad-arp-enablefix-dhcp-enableno…poison-check-enableDesc

360 | show dhcps config Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow dhcps configshow dhcps configDescriptionThis command pr

Parameter DescriptionNetmaskDisplays the subnet mask.DNS ServerDisplays the DNS server IP address.Domain NameDisplays the domain name configured for t

362 | show dhcps config Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand InformationW-IAP Platform Command ModeAll platformsP

show dhcp subnetsshow dhcp subnetsDescriptionThis command displays the subnet details and the gateway IP for distributed L2 and L3 networks.Usage Guid

364 | show distributed-dhcp-branch-counts Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow distributed-dhcp-branch-countsshow di

Command InformationW-IAP Platform Command ModeAll platformsPrivileged EXEC modeDell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide show

366 | show domain-names Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow domain-namesshow domain-namesDescriptionThis command di

show dpishow dpi {app <name> all|appcategory <name> all|debug statistics|qsessions [detail [<session_id>]]|webcategory <name>

368 | show dpi DellNetworking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideName App Category ID---- ---------------antivirus 1authentication 2clo

current minor version :1show dpi webcategoryThe following example shows the output of the show dpi webcategory all command:(Instant AP)# show dpi webc

auth-failure-blacklist-timeauth-failure-blacklist-time <seconds>DescriptionThis command allows the W-IAPs to dynamically blacklist the clients w

370 | show dpi DellNetworking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidecheating 53gross 54web-based-email 55malware-sites 56phishing-and-othe

show dpi-statsshow dpi-statsapp [id <app> |user ip <ip-addr>][full]appcategory [id <appcat> |user ip <ip-addr>][full]session [

372 | show dpi-stats Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow dpi-stats appcategoryThe following example shows the outpu

Web Reputation Web Reputation Id Total bytes-------------- ----------------- -----------trustworthy-sites 5 1211900moderate-risk-sites 3 2998---------

374 | show election DellNetworking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow electionshow election {statistics}DescriptionThis command sh

Command InformationW-IAP Platform Command ModeAll platformsPrivileged EXEC modeDell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide show

376 | show external-captive-portal Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow external-captive-portalshow external-captive

show faultshow fault [history]DescriptionThis command displays the list of active faults that occur in the event of a system fault and the faults that

378 | show fault Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand InformationW-IAP Platform Command ModeAll platformsPrivileg

show idsshow ids {ap <mac>| aps| client <mac>|clients| phy-types| rap-types}DescriptionThis command displays the list of unknown APs and c

38 | auth-survivability cache-time-out Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideauth-survivability cache-time-outauth-surviva

380 | show ids DellNetworking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideUnknown Clients Detected------------------------MAC Address Network Cl

show ids-detection configshow ids-detection configDescriptionThis command displays the list of intrusion detection policies configured on a W-IAP.Usag

382 | show ids-detection config DellNetworking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidesignature-asleap disable disable disable enableThe ou

show ids-protection configshow ids-protection configDescriptionThis command displays the list of infrastructure protection policies for a W-IAP.Usage

384 | show ids-protection config Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand InformationW-IAP Platform Command ModeAll p

show imageshow image versionDescriptionThis command displays the Instant software version running on a W-IAP.ExampleThe following example shows the ou

386 | show interface counters Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow interface countersshow interface countersDescript

Parameter DescriptionTransmitted dropped Shows total number of packets dropped.Transmission errors Shows total number of errors during packet transmit

388 | show inbound-firewall-rules Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow inbound-firewall-rulesshow inbound-firewall-r

show ip dhcp databaseshow ip dhcp databaseDescriptionThis command displays the DHCP server settings.Usage GuidelinesUse this command to the DHCP serve

blacklist-clientblacklist-client <MAC-address>no…DescriptionThis command allows you to manually blacklist the clients by using MAC addresses of

390 | show ip igmp Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow ip igmpshow ip igmp group [maddr <multicast-addr>]Desc

Parameter DescriptionVLAN Indicates the VLAN ID associated with the multicast groups or a specific multicast groupaddress.DestinationIndicates the des

392 | show ip interface brief Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow ip interface briefshow ip interface briefDescript

show ip routeshow ip routeDescriptionThis command displays the W-IAP routing table.Usage GuidelinesUse this command to view the IP routes configured f

394 | show lacp status Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow lacp statusshow lacp statusDescriptionThis command displ

show l2tpv3 configshow l2tpv3 configDescriptionThis command displays the L2TPV3 session and tunnel configuration details.Usage GuidelinesUse this comm

396 | show l2tpv3 config Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideParameter DescriptionFailover Retry CountDisplays the numbe

show l2tpv3 globalshow l2tpv3 global parameterDescriptionThis command displays L2TPv3 global configuration details such as hostname.Usage GuidelinesUs

398 | show l2tpv3 session Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow l2tpv3 sessionshow l2tpv3 session statusDescriptionTh

show l2tpv3 systemshow l2tpv3 system statisticsDescriptionThis command displays the L2TPV3 system statistics details.Usage GuidelinesUse this command

4 | About this Guide Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideType Style DescriptionItalicsThis style is used for emphasizing

40 | blacklist-time Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideblacklist-timeblacklist-time <seconds>DescriptionThis comm

400 | show l2tpv3 system DellNetworking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand InformationW-IAP Platform Command ModeAll platformsP

show l2tpv3 tunnelshow l2tpv3 tunnel {config | status}DescriptionThis command displays the L2TPtunnel status and configuration details.Usage Guidelin

402 | show l2tpv3 tunnel Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidesession profile: defaulthello timeout: 150, retry timeout:

show l3-mobilityshow l3-mobility {config| datapath| events [<count> <mac>]| status}DescriptionThis command displays details about the Laye

404 | show l3-mobility Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideColumn DescriptionVirtual Controller IPDisplays the Virtual C

Parameter Descriptionl Tx Mcasts - Displays information about multicast packets transmitted.l ARP Proxy Pkts - Displays information packets resolved t

406 | show l3-mobility Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideParameter DescriptionFAP IPIndicates the IP address of the W-

show ldap-serversshow radius-serversDescriptionThis command displays the Lightweight Directory Access Protocol (LDAP) servers configured for userauthe

408 | show ldap-servers Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand HistoryVersion DescriptionDell Networking W-Series I

show log ap-debugshow log ap-debug <count>DescriptionThis command shows the W-IAP debug logs.SyntaxParameter Description<count>Starts disp

caleacaleaencapsulation-type <gre>ip <IP-address>ip mtu <size>gre-type <type>no...DescriptionThis command creates a Communicat

410 | show log apifmgr Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow log apifmgrshow log apifmgr <count>DescriptionThis

show log convertshow log convertDescriptionThis command shows image conversion details for the W-IAP.Command HistoryVersion DescriptionDell Networking

412 | show log debug Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow log debugshow log debug{count}DescriptionThis command show

show log drivershow log driver <count>DescriptionThis command displays the status of drivers configured on the W-IAP.Command HistoryVersion Desc

414 | show log kernel Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow log kernelshow log kernelDescriptionThis command shows AP

show log l3-mobilityshow log l3-mobility [<count>]DescriptionThis command displays the logs for Layer-3 mobility domains configured on a W-IAP.S

416 | show log l3-mobility Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideContent DescriptionVC IPIndicates the IP address of the V

show log networkshow log network <count>DescriptionThis command shows network logs for the W-IAP.SyntaxParameter Description<count>Starts

418 | show log pppd Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow log pppdshow log pppd <count>DescriptionShows the Poi

show log rappershow log rapperDescriptionThis command show details the VPN connection logs in detail.Command HistoryVersion DescriptionDell Networking

42 | calea Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand HistoryVersion DescriptionDell Networking W-Series Instant 6.2.1.

420 | show log sapd DellNetworking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow log sapdshow log sapd <count>DescriptionThis command s

show log securityshow log security <count>DescriptionThis command shows security logs of the W-IAP.SyntaxParameter Description<count>Start

422 | show log system Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow log systemshow log system <count>DescriptionThis co

show log upgradeshow log upgradeDescriptionThis command shows image download from URL and upgrade details for both local image file and URL for the W-

424 | show log user Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow log usershow log user [count]DescriptionThis command shows

show log user-debugshow log user-debug [count]DescriptionThis command shows the W-IAP user debug logs.SyntaxParameter DescriptioncountStarts displayin

426 | show log vpn-tunnel Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow log vpn-tunnelshow log vpn-tunnel [count]DescriptionT

show log wirelessshow log wireless [<count>]DescriptionThis command shows wireless logs of the W-IAP.SyntaxParameter Description<count>Sta

428 | show memory Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow memoryshow memoryDescriptionDisplays the information about me

Command InformationW-IAP Platform Command ModeAll platformsPrivileged EXEC modeDell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide show

cellular-uplink-profilecellular-uplink-profile <profile>4g-usb-type <4G-usb-type>modem-isp <modem_isp>modem-country <modem-countr

430 | show mgmt-user Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow mgmt-usershow mgmt-userDescriptionThis command displays th

Column DescriptionNASis configured.In UseIndicates if the server is in use.RFC3576Indicates if the W-IAPs are configured to process RFC 3576-complian

432 | show network Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow networkshow network <name>DescriptionThis command show

Work without usable uplink :DisabledPercentage of Airtime: :UnlimitedOverall Limit: :UnlimitedPer-user Limit: :UnlimitedCommand HistoryVersion Descrip

434 | show network-summary Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow network-summaryshow network-summaryDescriptionThis c

show opendnsshow opendns [support]DescriptionThis command displays the open DNS configuration details for a W-IAP.SyntaxParameter DescriptionsupportDi

436 | show port status Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow port statusshow port statusDescriptionDisplays the activ

show pppoeshow pppoe {config|debug logs|debug status}DescriptionThis command shows PPPoE debug logs and uplink status.SyntaxParameter Descriptionconfi

438 | show pppoe Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand InformationW-IAP Platform Command ModeAll platformsPrivileg

show processshow processDescriptionThis command displays a list of processes running on a W-IAP.Usage GuidelinesUse this command to view the processes

44 | cellular-uplink-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideParameter Description Range Defaultusb-type <usb-typ

440 | show proxy config Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow proxy configshow proxy configDescriptionThis command di

show radio configshow radio configDescriptionThis command displays the 2.4 GHz and 5 GHz radio configuration details for a W-IAP.Usage GuidelinesUse t

442 | show radio config DellNetworking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideParameter DescriptionAnnouncement Countswitching to a new cha

show radius-servers supportshow radius-servers supportDescriptionThis command displays the RADIUS server configuration details for a W-IAP.Usage Guide

444 | show radius-servers support Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideParameter DescriptionAirgroup RFC3576 portIndicate

show rft trans-idshow rft trans-id {<id>| all}DescriptionThis command shows the transaction IDs of tests performed for RF troubleshooting.Syntax

446 | show rft profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow rft profileshow rft profile {all|antenna-connectivity|ht

Num Retries 0Data Rate All rates are triedProfile AntennaConnectivity: Built-in profile----------------------------------------------Parameter Value--

448 | show running-config Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow running-configshow running-configDescriptionThis comm

max-authentication-failures 0rf-band allcaptive-portal disabledtim-period 1inactivity-timeout 1000broadcast-filter nonedmo-channel-utilization-thresho

l ZTE WCDMA Technologies MSM (MF668?)l Fivespot (ZTE)l c-motech CNU-600l ZTE AC2736l SEC-8089 (EpiValley)l Nokia CS-10l NTT DoCoMo L-08C (LG)l NTT DoC

450 | show running-config Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand HistoryVersion DescriptionDell Networking W-Series

show snmp-configurationshow snmp-configurationDescriptionThis command displays the Simple Network Management Protocol (SNMP) configuration details for

452 | show snmp-configuration Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand HistoryVersion DescriptionDell Networking W-Se

show snmp trap-queueshow snmp trap-queueDescriptionThis command displays the list of SNMP traps in queue.Usage GuidelinesUse this command to view the

454 | show spectrum-alert Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow spectrum-alertshow spectrum-alertDescriptionThis comm

show statsshow stats {ap <IP-address>| client <MAC-address> | global | network <network-name>} [count]DescriptionThis command displa

456 | show stats Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide--------- ------------------- ---------------- --------------------

Client Signal Speed IP Address------ ------ ----- ----------169.254.90.154 good good 169.254.90.154Access Point Heatmap--------------------Access Poin

458 | show stats Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide16:36:54 0 0 0 0 016:36:24 0 0 0 0 016:35:54 0 0 0 0 016:35:23 0 0

Max Clients Threshold :64Background WMM Share :0Best Effort WMM Share :0Video WMM Share :0Voice WMM Share :0Certificate Installed: :NoInternal Radius

46 | cellular-uplink-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidel Huawei E180, E1692,E1762 (Optus (Aus))l Huawei E1731

460 | show stats Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand InformationW-IAP Platform Command ModeAll platformsPrivileg

show subscription-apsshow subscription-apsDescriptionThis command displays the subscription status of a W-IAP.Example(Instant AP) (config) # show subs

462 | show summary Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow summaryshow summary {<difference> | support}Descriptio

show swarmshow swarm {state|mode}DescriptionThis command displays the current status of the W-IAP cluster and indicates if W-IAPs are in a cluster or

464 | show supported-cert-formats Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow supported-cert-formatsshow supported-cert-for

show syslog-levelshow syslog-levelDescriptionThis command displays the Syslog logging levels configured for a W-IAP.Usage GuidelinesUse this command t

466 | show syslog-level Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand HistoryVersion DescriptionDell Networking W-Series I

show tacacs-serversshow tacacs-serversDescriptionThis command displays all the tacacs servers configured on a W-IAP.Usage GuidelinesUse this command t

468 | show tech-support Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow tech-supportshow tech-supportDescriptionThis command di

show uncommitted-configshow uncommitted-configDescriptionThis command displays the current configuration details that are yet to be committed and save

l Huawei 3276s-150l MC551Ll Pantech UML295l Pantech UML290When UML290 runs in auto detect mode, the modem can switch from 4G network to 3G network or

470 | show upgrade info Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow upgrade infoshow upgrade infoDescriptionThis command di

Command InformationW-IAP Platform Command ModeAll platformsPrivileged EXEC modeDell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide show

472 | show uplink Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow uplinkshow uplink {config|stats}DescriptionThis command displ

eth0 UP 0 YesWifi-sta INIT 6 No3G/4G INIT 7 NoInternet failover :disableMax allowed test packet loss:10Secs between test packets :30VPN failover timeo

474 | show uplink Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand InformationW-IAP Platform Command ModeAll platformsPrivile

show uplink-vlanshow uplink-vlanDescriptionThis command displays the uplink VLAN configuration details for the management traffic.Usage GuidelinesUse

476 | show users Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow usersshow user [portal| Radius]DescriptionThis command display

Command InformationW-IAP Platform Command ModeAll platformsPrivileged EXEC modeDell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide show

478 | show valid-channels Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow valid-channelsshow valid-channelsDescriptionThis comm

Parameter Description2.4 GHzDisplays the list of channels valid for a W-IAP in the 2.4 GHz band.5.0 GHzDisplays the list of channels valid for a W-IAP

48 | clear Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideclearclearap <ip-address>arp <ip-address>client <mac>da

480 | show version Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow versionshow versionDescriptionThis command displays the Inst

show vpnshow vpn {config|status|tunnels}DescriptionThis command displays the status and configuration details for VPN-enabled W-IAPs.SyntaxParameter D

482 | show vpn Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidel vpn monitor-pkt-send-freql vpn ikepskl gre typel gre primaryl gre p

show walled-gardenshow walled-gardenDescriptionThis command displays the domain names and websites that are blacklisted or whitelisted by a W-IAP.Usag

484 | show wifi-uplink Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow wifi-uplinkshow wifi-uplink {auth log |config | status}D

show wifi-uplink statusThe following output is displayed for the show wifi-uplink status command:configured :YESenabled :YESThe output of this command

486 | show wired-port Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow wired-portshow wired-port <profile-name>Description

------------Dest IP Dest Mask Dest Match Protocol (id:sport:eport) Action Log TOS 802.1P Blacklist MirrorDisScan ClassifyMedia------- --------- ------

488 | show wired-port-settings Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow wired-port-settingsshow wired-port-settingsDescr

Column Descriptionon the capabilities of the client, the AP, and the cable.poeIndicates if Power over Ethernet (PoE) is enabled.In UseIndicates if the

clear airgroup state statisticsclear airgroup state statisticsDescriptionThis command removes the AirGroup statistics.Usage GuidelinesUse this command

490 | show wispr config Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideshow wispr configshow wispr configDescriptionThis command di

show xml-api-servershow xml-api-server configDescriptionThis command displays the XML API server configuration details.Usage GuidelinesUse this comman

492 | snmp-server Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidesnmp-serversnmp-servercommunity <string> host <ipaddr>

Command HistoryVersion DescriptionDell Networking W-Series Instant 6.2.1.0-3.3This command is introduced.Command InformationW-IAP Platform Command Mod

494 | subscription-ap Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidesubscription-apsubscription-ap <MAC-address> status <

subscription-ap-enablesubscription-ap-enableno…DescriptionThis command enables the subscription of a W-IAP.SyntaxCommand/Parameter Descriptionsubscrip

496 | syslocation Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidesyslocationsyslocation <syslocation>no…DescriptionThis comma

syslog-levelsyslog-level <level> {ap-debug|network|security|system|user|user-debug|wireless}no...DescriptionThis command configures syslog facil

498 | syslog-level Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideUsage GuidelinesUse this command to configure syslog facility lev

syslog-serversyslog-server <IP-address>no…DescriptionThis command configures Syslog server for a W-IAP.SyntaxParameter Description Range Default

What is New in Instant 6.4.0.2-4.1This section lists the new and modified commands in the Instant 6.4.0.2-4.1 release.New CommandsThe following comman

50 | clear-cert Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideclear-certclear-cert {ca| server}DescriptionThis command clears clie

500 | telnet-server DellNetworking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidetelnet-servertelnet-serverno…DescriptionThis command enables Teln

terminal-accessterminal-accessno…DescriptionThis command enables Secure Shell (SSH) access to Instant CLI.SyntaxCommand/Parameter Descriptionterminal-

502 | tftp-dump-server Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidetftp-dump-servertftp-dump-server <IP-address>no…Descrip

traceroutetraceroute <ipaddr>DescriptionThis command traces the route to the specified IP address.SyntaxParameter Description<ipaddr>Displ

504 | upgrade-image DellNetworking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideupgrade-imageupgrade-image <url>upgrade-image2 <url>u

uplinkuplinkenforce {ethernet| cellular |wifi | none}failover-internetfailover-internet-check-timeoutfailover-internet-pkt-lost-cnt <count>failo

506 | uplink Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideParameter Description Range Defaultpackets are sent to verify theuplink

Uplink SwitchoverThe default priority for uplink switchover is Ethernet and then 3G/4G. The W-IAP has the ability to switch to the lowerpriority uplin

508 | uplink-vlan Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideuplink-vlanuplink-vlan <vlan-ID>DescriptionThis command conf

useruser <username> [<password>] [portal| radius]no…DescriptionThis command creates users for a W-IAP.SyntaxParameter Descriptionuser <

clock setclock set <year> <month> <day> <time>DescriptionThis command sets the date and time on the W-IAP system clock.SyntaxP

510 | user Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand InformationW-IAP Platform Command ModeAll platformsConfiguration

versionversion <version-number>DescriptionThis command configures a version number for the W-IAP.SyntaxParameter Descriptionversion <version-

512 | virtual-controller-country Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidevirtual-controller-countryvirtual-controller-countr

virtual-controller-ipvirtual-controller-ip <IP-address>DescriptionThis command configures an IP address for the Virtual Controller.SyntaxParamet

514 | virtual-controller-key DellNetworking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidevirtual-controller-keyvirtual-controller-key <name>

virtual-controller-vlanvirtual-controller-vlan <virtual-controller-vlan> <virtual-controller-mask> <virtual-controller-gateway>no…De

516 | vpn backup Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidevpn backupvpn backup <name>no…DescriptionThis command configu

vpn fast-failovervpn fast-failoverno…DescriptionThis command configures fast failover feature for VPN connections.SyntaxParameter Descriptionvpn fast-

518 | vpn gre-outside Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidevpn gre-outsidevpn gre-outsideno…DescriptionThis command enabl

vpn hold-timevpn hold-time <seconds>no...DescriptionThis command configures the time interval after which the W-IAP can switch over to the prima

52 | clock summer-time Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideclock summer-timeclock summer-time <timezone> recurring

520 | vpn ikepsk Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidevpn ikepskvpn ikepsk <ikepsk> username <username> passw

vpn monitor-pkt-lost-cntvpn monitor-pkt-lost-cnt <count>no...DescriptionThis command configures the number of lost packets after which the W-IAP

522 | vpn monitor-pkt-send-freq Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidevpn monitor-pkt-send-freqvpn monitor-pkt-send-freq &

vpn preemptionvpn preemptionno…DescriptionThis command enables pre-emption to allow the VPN tunnel to switch back to the primary host after a failover

524 | vpn primary Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidevpn primaryvpn primary <name>no...DescriptionThis command co

vpn reconnect-time-on-failovervpn reconnect-time-on-failover <down-time>DescriptionThis command defines a period after which the VPN connection

526 | vpn reconnect-user-on-failover Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidevpn reconnect-user-on-failovervpn reconnect-use

wifi0-modewifi0-mode <mode>DescriptionThis command configures a W-IAP to function in the access, monitor, or spectrum monitor mode.SyntaxParamet

528 | wifi1-mode Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidewifi1-modewifi1-mode <mode>DescriptionThis command configures

wired-port-profilewired-port-profile <port>access-rule-name <name>allowed-vlan <vlan>auth-server <name>captive-portal {<typ

Command HistoryVersion DescriptionDell Networking W-Series Instant 6.2.1.0-3.3This command is introduced.Command InformationW-IAP Platform Command Mod

530 | wired-port-profile DellNetworking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand/Parameter Description Range Defaultcaptive-portal{&l

Command/Parameter Description Range Defaultl equals — The rule is applied only if theattribute value is equal to thespecified string.l not-equals — Th

532 | wired-port-profile DellNetworking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand/Parameter Description Range Defaultthe value of the

(Instant AP)(wired ap profile"employeeWired1")# switchport-mode trunk(Instant AP)(wired ap profile"employeeWired1")# allowed-vlan

534 | wlan access-rule Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidewlan access-rulewlan access-rule <name>bandwidth-limit

Command/Parameter Description Range Defaultrules.ruleCreates an access rule.You can create up to 128 accesscontrol entries in an ACL for a userrole. H

536 | wlan access-rule Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand/Parameter Description Range Defaultof applications,ru

Command/Parameter Description Range Defaultyou can configure applicationthrottling by using the throttle-downstream and throttle-upoptions. For exampl

538 | wlan access-rule Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand HistoryVersion DescriptionDell Networking W-Series In

wlan auth-serverwlan auth-server <auth_profile_name>acctport <accounting-port>cppm-rfc3576-onlycppm-rfc3576-port <rfc3576-port>deadt

54 | clock timezone Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideclock timezoneclock timezone <name> <hour-offset> &l

540 | wlan auth-server Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand/Parameter Description Range DefaultIP-address>sour

Usage GuidelinesUse this command to configure an external RADIUS server and a CPPM server as a RADIUS server for AirGroupChange of Authorization (CoA)

542 | wlan captive-portal Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidewlan captive-portalwlan captive-portalauthenticatedbackgro

Command/Parameter Description Range Defaultoriginally requested. When a URL isconfigured for redirection, it overridesthe user’s original request and

544 | wlan external-captive-portal Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidewlan external-captive-portalwlan external-captive

Command/Parameter Description Range DefaultInternet when the external captive portalserver is not available.no…Removes the configuration. — —Usage Gui

546 | wlan ldap-server Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidewlan ldap-serverwlan ldap-server <server-name>admin-dn

Command/Parameter Description Range Defaultkey-attribute <key-attribute>Configures the attribute to use as akey when searching for the LDAPserve

548 | wlan ssid-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidewlan ssid-profilewlan ssid-profile <ssid_profile>a-max

type {employee|voice|guest}vlan <vlan>wep-key <wep-key>wisprwmm-background-dscp <dscp>wmm-background-share <share>wmm-best-eff

commitcommit {apply [no-save]| revert}DescriptionThis command allows you to commit configuration changes performed during a user session. You can also

550 | wlan ssid-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand/Parameter Description Range Defaultinternal server.b

Command/Parameter Description Range Defaultdecision.deny-local-routingDisables the routing trafficbetween two clients connected tothe same SSID on dif

552 | wlan ssid-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand/Parameter Description Range Defaultfor the SSID prof

Command/Parameter Description Range Defaultinactivity-timeout <interval>Configures a timeout value for theinactive client sessions.When a client

554 | wlan ssid-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand/Parameter Description Range Defaultmax-authenticatio

Command/Parameter Description Range Defaultpreshared key.l wpa-tkip — WPA with TKIPencryption and dynamic keysusing 802.1x.l wpa-psk-tkip — WPA with T

556 | wlan ssid-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand/Parameter Description Range DefaultRADIUS server at

Command/Parameter Description Range Defaultset-role-mac-auth <mac-only>Configures a MAC authenticationbased user role.— —set-role-machine-auth&l

558 | wlan ssid-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand/Parameter Description Range Defaultoperator is avail

Command/Parameter Description Range Defaultwmm-video-dscp <dscp>Allows you to specify the DSCPmapping value for the video traffic.0—63 —wmm-vide

56 | configure terminal Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideconfigure terminalconfigure terminalDescriptionThis command

560 | wlan ssid-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide(Instant AP)(SSID Profile "employee1")# set-vlan m

wlan sta-profilewlan sta-profileessid <ESSID>cipher-suite <cipher-suite-string>wpa-passphrase <WPA-key>uplink-band <band>no…De

562 | wlan sta-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide(Instant AP)(config) # wlan sta-profile(Instant AP)(sta uplin

wlan tacacs-serverwlan tacacs-server <profile-name>ip <IP-address>port <port>key <key>timeout <seconds>retry-count <n

564 | wlan tacacs-server Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand HistoryVersion DescriptionDell Networking W-Series

wlan walled-gardenwlan walled-gardenwhite-list <domain>black-list <domain>no…DescriptionThis command configures a walled garden to control

566 | wlan walled-garden Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideExampleThe following example configures a walled garden pro

wlan wispr-profilewlan wispr-profilewispr-location-id-ac <ac>wispr-location-id-cc <cc>wispr-location-id-isocc <issoc>wispr-location-

568 | wlan wispr-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideExampleThe following commands configure a WISPr authenticat

writewrite {erase <all> <reboot>|memory}DescriptionThis command saves the running configuration to memory or displays the running configur

consoleconsoleenabledisableDescriptionThis command enables console access to a W-IAP through the serial port.SyntaxCommand/Parameter Descriptionconsol

570 | xml-api-server Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidexml-api-serverxml-api-serverip <ip-address>key <shared

zonenamezonename <name>no…DescriptionThis command configures a zone name for the W-IAP. You can configure zone settings on a W-IAP and the SSIDp

Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide Terminology | 572TerminologyAcronyms and AbbreviationsThe following table lists the

573 | Terminology Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideAbbreviation ExpansionPEAP Protected Extensible Authentication Pro

Term DefinitionAP An access point (AP) connects users to other users within the network andalso can serve as the point of interconnection between the

575 | Terminology Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideTerm Definitionfixed wireless Wireless devices or systems in fixed

Term DefinitionW-CDMA Officially known as IMT-2000 direct spread; ITU standard derived fromCode-Division Multiple Access (CDMA). Wideband code-divisio

58 | content-filtering Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidecontent-filteringcontent-filteringno…DescriptionThis command

convert-aos-apconvert-aos-ap <mode> <controller-IP>DescriptionThis command allows you to provision a W-IAP as a Campus AP or Remote AP in

6 | About this Guide Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideModified CommandsThe following commands are modified in the Ins

60 | copy Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidecopycopy {config tftp <ip-address> <filename>|core-file tftp &

Command HistoryVersion DescriptionDell Networking W-Series Instant6.3.1.1-4.0This command was modified.Dell Networking W-Series Instant6.2.1.0-3.3This

62 | deny-inter-user-bridging Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidedeny-inter-user-bridgingdeny-inter-user-bridgingno…Des

deny-local-routingdeny-local-routingno…DescriptionThis command disables routing traffic between two clients of a W-IAP on different VLANs. Routing tra

64 | device-id Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidedevice-iddevice-id <device>DescriptionThis command assigns an I

disable-prov-ssiddisable-prov-ssidno…DescriptionThis command disables the default provisioning SSID enabled in the W-IAP factory default settings.Usag

66 | disconnect-user Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidedisconnect-userdisconnect-user {<addr>|all|mac <mac>

download-certdownload-cert {ca|cp|server} <URL>DescriptionThis command allows you to download the client, authentication server, and captive por

68 | dpi Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidedpidpino…DescriptionThis command enables visualization of traffic from wire

dynamic-cpu-mgmtdynamic-cpu-mgmt {auto| disable| enable}DescriptionThis command enables or disables the dynamic CPU management feature, to manage reso

Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide Instant CLI | 7Chapter 1Instant CLIInstant supports the use of Command Line Interfa

70 | dynamic-radius-proxy Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidedynamic-radius-proxydynamic-radius-proxyno…DescriptionThis

enet-vlanenet-vlan <vlan-ID>no…DescriptionThis command configures a VLAN for Ethernet connections.SyntaxParameter Description Rangeenet-vlan <

72 | enet0-bridging Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideenet0-bridgingenet0-bridgingDescriptionThis command allows you t

enet0-port-profileenet0-port-profile <profile>DescriptionThis command assigns a wired profile to the Ethernet 0 port on a W-IAP.SyntaxParameter

74 | enet1-port-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideenet1-port-profileenet1-port-profile <profile>Descript

enet2-port-profileenet2-port-profile <profile>DescriptionThis command assigns a wired profile to the Ethernet 2 port on a W-IAP.SyntaxParameter

76 | enet3-port-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideenet3-port-profileenet3-port-profile <profile>Descript

enet4-port-profileenet4-port-profile <profile>DescriptionThis command assigns a wired profile to the Ethernet 4 port on a W-IAP.SyntaxParameter

78 | extended-ssid Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideextended-ssidextended-ssidno…DescriptionThis command enables the

factory-ssid-enablefactory-ssid-enableDescriptionThis command resets the W-IAP to use the factory configuration.SyntaxParameter Descriptionfactory-ssi

8 | Instant CLI Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideTo apply the configuration changes to the cluster, without saving th

80 | firewall-external-enforcement Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidefirewall-external-enforcementfirewall-external-en

(Instant AP)(firewall-external-enforcement pan)# user admin1 admin1(Instant AP)(firewall-external-enforcement pan)# end(Instant AP)# commit applyComma

82 | g-channel Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guideg-channelg-channel <channel> <tx-power>DescriptionThis co

g-external-antennag-external-antenna <gain>DescriptionThis command configures external antenna connectors for a W-IAP.SyntaxParameter Descriptio

84 | g-external-antenna Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand HistoryVersion DescriptionDell Networking W-Series I

gre per-ap-tunnelgre per-ap-tunnelno…DescriptionThis command configures a generic routing encapsulation (GRE) tunnel from each W-IAP to the VPN/GRE En

86 | gre primary Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidegre primarygre primary <name>no…DescriptionThis command confi

gre typegre type <type>DescriptionThis command configures a GREprotocol number as GRE type.SyntaxParameter Description Range Defaultgre type &l

88 | help DellNetworking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuidehelphelpDescriptionThis command displays help for the CLI.Usage GuidelinesT

Command InformationW-IAP Platform Command ModeAll platformsPrivileged EXEC modeDell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guide help

Using Sequence Sensitive CommandsThe Instant CLI does not support positioning or precedence of sequence-sensitive commands. Therefore, it isrecommende

90 | hostname Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidehostnamehostname <name>DescriptionThis command changes the hostn

hotspot anqp-3gpp-profilehotspot anqp-3gpp-profile <profile-name>3gpp-plmn1…3gpp-plmn6 <PLMN-ID>enableno…DescriptionThis command configure

92 | hotspot anqp-3gpp-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideCommand InformationW-IAP Platform Command ModeAll pla

hotspot anqp-domain-name-profilehotspot anqp-domain-name-profile <profile-name>domain-name <domain-name>enableno…DescriptionThis command d

94 | hotspot anqp-ip-addr-avail-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidehotspot anqp-ip-addr-avail-profilehotspot an

hotspot anqp-nai-realm-profilehotspot anqp-nai-realm-profile <profile-name>enablenai-home-realmnai-realm-auth-id-1 <auth-ID>nai-realm-auth

96 | hotspot anqp-nai-realm-profile DellNetworking W-Series Instant 6.4.0.2-4.1 | CLI Reference GuideParameter Description Range<auth-value>Conf

Parameter Description Rangenai-realm-name<nai-realm-name>Configures a name for the NAI realm. The realm name is oftenthe domain name of the serv

98 | hotspot anqp-nwk-auth-profile Dell Networking W-Series Instant 6.4.0.2-4.1 | CLI Reference Guidehotspot anqp-nwk-auth-profilehotspot anqp-nwk-aut

(Instant AP)(network-auth "default")# nwk-auth-type dns-redirection(Instant AP)(network-auth "default")# url http://www.example.co