Dell PowerEdge C6105 Nutzung PDF herunterladen (Seite 66)

DCMI V1.0

The following table lists the command support list.

VLAN Configuration

The VLAN is confiugred through the IPMI Set/Get LAN Configuration

command.

To configure the VLAN:

Get VLAN ID :

>ipmitool -H <BMC IP Address> -I lanplus -U root -P root raw 0x0C

0x02 0x01 0x14 0x00 0x00

>11 00 00



VLAN is disabled/VLAN ID is zero.

Enable and Set VLAN ID :

>ipmitool -H <BMC IP Address> -I lanplus -U root -P root raw 0x0C

0x01 0x01 0x14 0x02 0x80

Disable VLAN ID :

>ipmitool -H <BMC IP Address> -I lanplus -U root -P root raw 0x0C

0x01 0x01 0x14 0x00 0x00

BMC Version Information

The BMC firmware version can be obtained by using the IPMI - Get Device

ID command.

To get the BMC firmware version:

Table 1-47. DCMI Commands

Command NetFn CMD O/M Supported

Get DCMI Capability Info DCGRP (2Ch) 01h M Yes

Get Asset Tag DCGRP (2Ch) 06h M Yes

Get DCMI Sensor Info DCGRP (2Ch) 07h M Yes

Get Power Reading DCGRP (2Ch) 02h O Yes

Get Power Limit DCGRP (2Ch) 03H O Yes

Set Power Limit DCGRP (2Ch) 04h O Yes

Activate/Deactivate Power Limit DCGRP (2Ch) 05h O Yes

1 2 ... 61 62 63 64 65 66 67 68

Keine Kommentare

Dell PowerEdge C6105 Nutzung Seite 66