Dell PowerEdge 2650 Anleitung zur Fehlerbehebung Seite 22

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 74
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 21
E0212
VOLT CPU VRM
Microprocessor VRM voltage is out of acceptable
range; faulty or improperly installed
microprocessor VRM; faulty system board.
Ensure that supported VRMs of the same type are properly installed. If the
problem persists, replace the VRMs (see Figure6-9). If the problem persists,
see "Getting Help."
E0212
VOLT NIC 1.8V
Integrated NIC voltage is out of acceptable
range; faulty or improperly installed power
supply; faulty system board.
See "Troubleshooting Power Supplies" in "Troubleshooting Your System."
E0212
VOLT NIC 2.5V
E0212
VOLT PLANAR
REG
System board is out of acceptable voltage range;
faulty or improperly installed system board.
E0276
CPU VRM n
Specified microprocessor VRM is faulty,
unsupported, improperly installed, or missing.
Ensure that supported VRMs of the same type are properly installed. If the
problem persists, replace the VRM (see Figure6-9 in "Installing System
Options").
E0276
MISMATCH VRM
n
E0280
MISSING VRM n
E0319
PCI OVER
CURRENT
Faulty or improperly installed expansion card.
See "Troubleshooting Expansion Cards" in "Troubleshooting Your System."
E0412
RPM FAN n
Specified cooling fan is faulty, improperly installed,
or missing.
See "Troubleshooting a Cooling Fan" in "Troubleshooting Your System."
E0780
MISSING CPU 1
Microprocessorisnotinstalledinsocket1.
Install a microprocessor in socket 1 (see "Adding or Replacing a
Microprocessor" in "Installing System Options"). To identify microprocessor
socket 1, see FigureA-3.
E07F0
CPU IERR
Faulty or improperly installed microprocessor.
See "Troubleshooting a Microprocessor" in "Troubleshooting Your System."
E07F1
TEMP CPU n
HOT
Specified microprocessor is out of acceptable
temperature range and has halted operation.
See "Troubleshooting System Cooling" in "Troubleshooting Your System." If
the problem persists, ensure that the microprocessor heat sinks are properly
installed (see "Adding or Replacing a Microprocessor" in "Installing System
Options").
E07F4
POST CACHE
Faulty or improperly installed microprocessor.
See "Troubleshooting a Microprocessor" in "Troubleshooting Your System."
E07F4
POST CPU REG
E07F4
POST CPU SMI
SMI handler failed to initialize; faulty system
board.
See "Getting Help."
E07FA
TEMP CPU n
THERM
Specified microprocessor is out of acceptable
temperature range and is operating at a reduced
speed, or frequency.
See "Troubleshooting System Cooling" in "Troubleshooting Your System." If
the problem persists, ensure that the microprocessor heat sinks are properly
installed (see "Adding or Replacing a Microprocessor" in "Installing System
Options").
E0876
POWER PS n
No power available from the specified power
supply; specified power supply is improperly
installed or faulty.
See "Troubleshooting Power Supplies" in "Troubleshooting Your System."
E0880
INSUFFICIENT
PS
Insufficient power is being supplied to the
system; power supplies are improperly installed,
faulty, or missing.
See "Troubleshooting Power Supplies" in "Troubleshooting Your System."
E0CB2
MEM SPARE ROW
Correctable errors threshold was met in a
memory bank: errors were remapped to the
spare row.
See "Troubleshooting System Memory" in "Troubleshooting Your System."
E0CF1
MBE DIMM Bank
n
Memory modules installed in the specified bank
are not the same type and size; faulty memory
module(s).
Ensure that all banks contain memory modules of the same type and size and
that they are properly installed. If the problem persists, see "Troubleshooting
System Memory" in "Troubleshooting Your System."
E0CF1
POST MEM 64K
Parityfailureinthefirst64KBofmainmemory.
See "Troubleshooting System Memory" in "Troubleshooting Your System."
E0CF1
POST NO
MEMORY
Main-memory refresh verification failure.
Ensure that all banks contain memory modules of the same type and size and
that they are properly installed. If the problem persists, see "Troubleshooting
System Memory" in "Troubleshooting Your System."
E0CF5
LOG DISABLE
SBE
Multiple single-bit errors on a single memory
module.
See "Troubleshooting System Memory" in "Troubleshooting Your System."
E0D76
DRIVE FAIL
Faulty or improperly installed hard drive or RAID
controller.
See "Troubleshooting Hard Drives" and "Troubleshooting a RAID Controller
Card" in "Troubleshooting Your System."
E0F04
POST CMOS
CMOS write/read failure; faulty system board.
See "Getting Help."
E0F04
POST CPU
SPEED
Microprocessor speed control sequence failure.
See "Getting Help."
E0F04
POST DMA INIT
DMA initialization failure; DMA page register
write/read failure.
See "Troubleshooting System Memory" in "Troubleshooting Your System."
E0F04
POST DMA REG
Faulty system board.
See "Getting Help."
E0F04
POST KYB
CNTRL
Faulty keyboard controller; faulty system board.
See "Getting Help."
E0F04
POST MEM RFSH
Main-memory refresh verification failure.
See "Troubleshooting System Memory" in "Troubleshooting Your System."
E0F04
POST PIC REG
Master or slave PIC register test failure.
See "Getting Help."
E0F04
POST SHADOW
BIOS-shadowing failure.
See "Troubleshooting System Memory" in "Troubleshooting Your System."
E0F04
POST SHD TEST
Shutdown test failure.
E0F04
POST SIO
Super I/O chip failure; faulty system board.
See "Getting Help."
E0F04
POST TIMER
Programmable interval timer test failure; faulty
system board.
See "Getting Help."
E0F0B
POST ROM
CHKSUM
Faulty or improperly installed expansion card.
See "Troubleshooting Expansion Cards" in "Troubleshooting Your System."
E0F0C
VID MATCH CPU
n
Specified microprocessor is faulty, unsupported,
improperly installed, or missing.
See "Troubleshooting a Microprocessor" in "Troubleshooting Your System."
E10F3
LOG DISABLE
BIOS disabled logging errors.
Check the SEL for details on the errors.
Seitenansicht 21
1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 73 74

Kommentare zu diesen Handbüchern

Keine Kommentare