Dell 64-Bit Installationshandbuch PDF herunterladen (Seite 7)

www.dell.com | support.dell.com

Installation Instructions 1-3

d Exit the SCSI Disk Utility and restart the system by pressing

<Esc> several times.

The EFI Boot Manager appears.

e Go to step 4.

• To configure the PERC 3/QC or PERC 4/DC controller:

a When prompted during POST, press <Ctrl><m>.

b Select Configure→ New Configuration→ Yes.

c Configure your RAID disks in the appropriate RAID array.

The configuration might vary depending on the installed

physical disks, the required RAID level, and the number of

desired virtual disks.

See the RAID documentation that came with your system for

more information.

d Click Accept and then click Save to save the new configuration.

e Press <Esc>.

The main Management Menu appears.

f Initialize the virtual disks that you just configured in step c.

g Press <Esc> several times to return to the main Management

Menu.

h Press <Ctrl><Alt><Delete> to restart your system.

The EFI Boot Manager appears.

i Go to step 4.

4 Select CD-ROM, and when prompted, press any key to boot your

system from the Windows Server 2003 CD.

NOTE: If you do not press a key on the keyboard, your system reverts

back to the Extensible Firmware Interface (EFI) Boot Manager, which

allows you to repeat this step.

The Welcome to Setup screen appears.

1 2 3 4 5 6 7 8 9 10 11 12 ... 17 18

Keine Kommentare

Dell 64-Bit Installationshandbuch Seite 7