Dell TL24iSCSIxSAS Betriebsanweisung PDF herunterladen (Seite 13)

Installing the iSCSI bridge

Dell Model TL24iSCSIxSAS 1Gb iSCSI to SAS User’s Guide Rev.C Page 11

Figure 4 Store the label of the library

• Remove the blank plate (see Figure 5) on the rear of the library (you need a #3 Phillips screwdriver).

Figure 5 Remove the blank plate

Important:

If your TL2000 library is without card guide rails for the bridge, please

install the card guide rails (reference the Getting Started Guide).

• Before open the shipping packaging, inspect the box for shipping damage. If you notice any damage,

report it to the shipping company.

• Unpack carefully the iSCSI board and install it into the library.

• It is advisable to retain all your original packaging material in the event you need to ship the bridge.

To prevent damage the bridge must be shipped in the original packaging material.

• Lock the bridge in place with two Thumb Screws (see Figure 6 steps 1, 2).

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 65 66

Keine Kommentare

Dell TL24iSCSIxSAS Betriebsanweisung Seite 13