Dell QLA2200F Bedienungsanleitung PDF herunterladen (Seite 11)

EMC VisualSAN Version 4.1 Support Matrix

VisualSAN Requirements

Removing Discovered Devices

VisualSAN attempts to discover all devices in the discovery range

you enter during configuration; all discovered devices then appear in

the Topology Map and the Devices tree. If the discovery range

entered exceeds the range of your SAN, VisualSAN might discover

and display unwanted devices. To remove the devices from the

display, you must modify your discovery range, eliminating the IP

addresses corresponding to the unwanted devices. Then restart

discovery so that VisualSAN rediscovers the devices in your SAN

based on the updated IP address discovery range and properly

displays your SAN in the Topology Map and SAN Devices tree.

VisualSAN Agent Requirements

The VisualSAN agents should be installed on all SAN-attached hosts

to be managed by VisualSAN. The minimum hardware requirements

follow in Table 4, while the Emulex and QLogic HBA driver

requirements are in Table 5. Both sets of requirements must be met for

the host agent to operate correctly.

Requirements for HBA driver libraries follow.

Table 4 VisualSAN Agent Hardware Requirements

Processor RAM Disk Space

Intel Pentium III 600 MHz 256 MB 50 MB

Sun UltraSPARC 400 MHz 256 MB 120 MB

Table 5 HBA Drive Library Requirements

Vendor Platform Path and filename

Emulex Windows Windows_directory\system32

\emulexhbaapi.dll

Solaris /usr/lib/libemulexhbaapi.so

Linux /usr/src/linux_release/drivers/scsi

/lpfc/libemulexhbaapi.so

QLogic Windows Windows_directory\system32\qlsdm.dll

Solaris /usr/lib/libqlsdm.so

Linux /usr/lib/libqlsdm.so

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 31 32

Keine Kommentare

Dell QLA2200F Bedienungsanleitung Seite 11