Dell OpenManage Server Administrator Version 6.0.1 Bedienungsanleitung PDF herunterladen (Seite 201)

Using the Storage Management Service 201

omconfig Unassign Global Hot Spare

Use the following omconfig command syntax to unassign a physical disk as a

global hot spare.

Complete Syntax

omconfig storage pdisk action=assignglobalhotspare

controller=id pdisk=<PDISKID> assign=no

where id is the controller ID. The <PDISK> variable specifies the physical disk.

To obtain these values, enter omreport storage controller to display the

controller IDs and then enter omreport storage pdisk controller=ID to

display the IDs for the physical disks attached to the controller.

Example Syntax

In this example, you want to unassign physical disk 3 on connector 0 of

controller 1 as a global hot spare. On a SAS controller, the physical disk

resides in enclosure 2.

Example for SCSI, SATA, and ATA Controllers

To unassign the physical disk described in this example as a global hot spare,

enter:

omconfig storage pdisk action=assignglobalhotspare

controller=1 pdisk=0:3 assign=no

Example for SAS Controllers

To unassign the physical disk described in this example as a global hot spare,

enter:

omconfig storage pdisk action=assignglobalhotspare

controller=1 pdisk=0:2:3 assign=no

1 2 ... 196 197 198 199 200 201 202 203 204 205 206 ... 276 277

Keine Kommentare

Dell OpenManage Server Administrator Version 6.0.1 Bedienungsanleitung Seite 201