Dell 760 Betriebsanweisung PDF herunterladen (Seite 94)

Back to Contents Page

Dell™OptiPlex™760ServiceManual

I/O Panel

I/O Panel



Removing the I/O Panel



1. Follow the procedures in Working on Your Computer.



2. Remove the computer cover (see Removing the Computer Cover).



3. Remove the screw that secures the I/O panel. Press the release button to slide the card away from the front of the computer.



4. Disconnect all of the cables from the I/O panel, and remove the panel from the computer.



Replacing the I/O Panel



1. To replace the I/O panel, follow the removal procedure in the reverse order.

Back to Contents Page



WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

WARNING: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.

NOTE: Note the routing of all cables as you remove them so that you can re-route them correctly when installing the new I/O panel.

CAUTION: When sliding the I/O panel out of the computer, be extremely careful. Carelessness may result in damage to the cable connectors and

the cable routing clips.

I/O panel release button

securing screw

I/O panel

I/O cable connector

NOTE: Use the guides on the I/O panel bracket to help position the I/O panel in place, and use the notch on the I/O panel bracket to help seat

the panel.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 202 203

Keine Kommentare

Dell 760 Betriebsanweisung Seite 94