Dell Studio XPS M1340 (Mid 2010) Bedienungsanleitung

Dell™StudioXPS™1340ServiceManual Notes, Notices, and Cautions Information in this document is subject to change without notice. ©2008DellInc

Back to Contents Page  Processor Dell™StudioXPS™1340ServiceManual Removing the Processor Installing the Processor       Removin

Installing the Processor    1. Align the pin-1 corner of the processor so that it points to the triangle on the ZIF socket, and insert the proces

Back to Contents Page  Processor Heat Sink Dell™StudioXPS™1340ServiceManual Central Processor Heat Sink Graphic Processor Heat Sink/Ther

 3. Tighten the four captive screws that secure the central processor heat sink to the system board.  4. Replace the rear caps (see Replacing th

3. Tighten the two captive screws and replace the other two screws that secure the graphic processor heat sink to the system board.  4. Connect th

Back to Contents Page  Display Assembly Dell™StudioXPS™1340ServiceManual Removing the Display Assembly Replacing the Display Assembly

 8. Disconnect the display cable, power light cable, and camera cable from their system board connectors and dislodge the cables from their routing

Back to Contents Page  eSATA Connector Dell™StudioXPS™1340ServiceManual Removing the eSATA Connector Replacing the eSATA Connector  

 5. Replace the system board (see Replacing the System Board).  6. Replace the display assembly (see Replacing the Display Assembly). Back to C

Back to Contents Page  Hard Drive Dell™StudioXPS™1340ServiceManual Removing the Hard Drive Replacing the Hard Drive       Remov

Back to Contents Page  Base Cover Dell™StudioXPS™1340ServiceManual Removing the Base Cover Replacing the Base Cover      Removin

 7. Remove the four screws that secure the hard drive bracket to the hard drive and remove the bracket. Replacing the Hard Drive  1. Remove t

Back to Contents Page  Rear Caps Dell™StudioXPS™1340ServiceManual Removing the Rear Caps Replacing the Rear Caps      Removing t

Back to Contents Page  Keyboard Dell™StudioXPS™1340ServiceManual Removing the Keyboard Replacing the Keyboard     Removing the Ke

Replacing the Keyboard  1. Replace the keyboard on the palm rest.  2. Align the keyboard shield over the screw holes on the palm rest.  3.

Back to Contents Page  Status Light Board Dell™StudioXPS™1340ServiceManual Removing the Status Light Board Replacing the Status Light Bo

Back to Contents Page  Memory Dell™StudioXPS™1340ServiceManual Removing the Memory Module(s) Replacing the Memory Module(s)     Yo

2. Slide the module firmly into the slot at a 45-degree angle, and press the module down until it clicks into place. If you do not feel the click, rem

Back to Contents Page  Wireless Mini-Card Dell™StudioXPS™1340ServiceManual Removing the Mini-Card Replacing the Mini-Card     If y

 4. Remove the screw that secures the Mini-Card to the system board.  5. Lift the Mini-Card out of the system board connector.  Replacing

Back to Contents Page  Battery Latch Assembly Dell™StudioXPS™1340ServiceManual Removing the Battery Latch Assembly Replacing the Battery

Back to Contents Page 

Back to Contents Page  Optical Drive Dell™StudioXPS™1340ServiceManual Removing the Optical Drive Replacing the Optical Drive     

 6. Detach the interposer from the optical drive. Replacing the Optical Drive  1. Attach the interposer to the optical drive.  2. Place th

Back to Contents Page  Palm Rest Dell™StudioXPS™1340ServiceManual Removing the Palm Rest Replacing the Palm Rest     Removing the

 6. Starting at the back center of the palm rest, use your fingers to gently ease the palm rest from the computer base by lifting the inside of the

Back to Contents Page  AC Adapter Connector Dell™StudioXPS™1340ServiceManual Removing the AC Adapter Connector Replacing the AC Adapter

 4. Replace the eSATA connector (see Replacing the eSATA Connector). Back to Contents Page 

Back to Contents Page  System Board Dell™StudioXPS™1340ServiceManual Removing the System Board Replacing the System Board     The

 13. Disconnect the display cable, power light cable, camera cable, and status light board cable from the system board connector.  14. Lift the

 14. Replace the coin-cell battery (see Replacing the Coin-Cell Battery).  15. Replace the base cover (see Replacing the Base Cover).   16.

 4. Replace the mylar tapes. Ensure that the newly installed latch moves smoothly and freely when pushed and released.  5. Follow the instructio

Back to Contents Page  Before You Begin Dell™StudioXPS™1340ServiceManual Recommended Tools Turning Off Your Computer Before Working I

2. Turn off your computer (see Turning Off Your Computer).   3. Disconnect all telephone or network cables from the computer.  4. Press and ej

Back to Contents Page  Flashing the BIOS Dell™StudioXPS™1340ServiceManual Flashing the BIOS From a CD Flashing the BIOS From the Hard Dr



Back to Contents Page  Coin-Cell Battery Dell™StudioXPS™1340ServiceManual Removing the Coin-Cell Battery Replacing the Coin-Cell Battery