Dell M4300 Anleitung zur Fehlerbehebung PDF herunterladen (Seite 12)



1. Align the pin-1 corner of the processor module so that it points to the triangle on the ZIF socket, and insert the processor module into the ZIF socket.

When the processor module is correctly seated, all four corners are aligned at the same height. If one or more corners of the module are higher than the

others, the module is not seated correctly.



2. Tighten the ZIF socket by turning the cam screw clockwise to secure the processor module to the system board.



3. Replace the processor thermal-cooling assembly (see Processor Thermal-Cooling Assembly).



4. Update the BIOS using a flash BIOS-update program CD (see Flashing the BIOS From a CD).

Back to Contents Page



NOTICE: A processor module that is not properly seated can result in an intermittent connection or permanent damage to the processor and ZIF

socket.

NOTICE: Hold the processor down while turning the cam screw to prevent intermittent contact between the cam screw and processor.

NOTE: If a new microprocessor is installed, you will receive one of the following: a new thermal-cooling assembly which will include an affixed thermal

pad, or a new thermal pad along with a tech sheet to illustrate proper installation.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 41 42

Kommentare zu diesen Handbüchern

Keine Kommentare

Dell M4300 Anleitung zur Fehlerbehebung Seite 12

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Notebooks Dell M4300