Dell D630 - LATITUDE ATG NOTEBOOK Anleitung zur Fehlerbehebung PDF herunterladen (Seite 23)



4. Ground yourself and install the new memory module:

a. Align the notch in the module edge connector with the tab in the connector slot.

b. Slide the module firmly into the slot at a 45-degree angle, and rotate the module down until it clicks into place. If you do not feel the click, remove

the module and reinstall it.



5. Replace the memory module cover.



6. Insert the battery into the battery bay, or connect the AC adapter to your computer and an electrical outlet.



7. Turn on the computer.

As the computer boots, it detects the additional memory and automatically updates the system configuration information.



8. To confirm the amount of memory installed in the computer:

l In the Microsoft

WindowsVista™operatingsystem, click Start ® Help and Support® Computer Information.

l In the Microsoft Windows

XP operating system, right-click the My Computer icon on your desktop, click Properties, and then click General.

Back to Contents Page



memory-module securing clips (2)

memory module



NOTICE: Insert memory modules at a 45-degree angle to avoid damaging the connector.

NOTE: If the memory module is not installed properly, the computer may not boot properly. No error message indicates this failure.

NOTICE: If the cover is difficult to close, remove the module and reinstall it. Forcing the cover to close may damage your computer.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 42 43

Kommentare zu diesen Handbüchern

Keine Kommentare

Dell D630 - LATITUDE ATG NOTEBOOK Anleitung zur Fehlerbehebung Seite 23

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Notebooks Dell D630 - LATITUDE ATG NOTEBOOK