Dell Studio PP24L Spezifikationen PDF herunterladen (Seite 12)

Back to Contents Page

 Processor

DellStudio™1435ServiceManual

Removing the Processor

Installing the Processor



Removing the Processor



1. Follow the instructions in Before You Begin.



2. Turn the computer over and remove the base cover (see Removing the Base Cover).



3. Remove the fan (see Removing the Fan).



4. Remove the processor heat sink (see Removing the Processor Heat Sink).



5. Using a flathead screwdriver, rotate the processor release latch counterclockwise to release the processor from the processor socket.



6. Use a processor extraction tool to remove the processor.

Installing the Processor



1. Align the pin-1 corner of the processor so that it points to the triangle on the ZIF socket, and insert the processor into the ZIF socket.

CAUTION: Before working inside your computer, follow the safety instructions that shipped with your computer.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such

as a connector on the back of the computer).

NOTICE: To prevent intermittent contact between the ZIF-socket cam screw and the processor when removing or replacing the processor, press to

apply slight pressure to the center of the processor while turning the cam screw.

NOTICE: To avoid damage to the processor, hold the screwdriver so that it is perpendicular to the processor when turning the cam screw.

NOTICE: When removing the processor, pull it straight up. Be careful not to bend the pins on the processor.

processor

pin-1 corner of processor

ZIF socket

ZIF-socket cam screw



NOTICE: Ensure that the cam lock is in the fully open position before seating the processor. Seating the processor properly in the ZIF socket does not

require force.

NOTICE: A processor that is not properly seated can result in an intermittent connection or permanent damage to the processor and ZIF socket.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 40 41

Kommentare zu diesen Handbüchern

Keine Kommentare

Dell Studio PP24L Spezifikationen Seite 12

Kommentare zu diesen Handbüchern