Dell PowerVault NX1950 Bedienungsanleitung PDF herunterladen (Seite 6)

5. iSCSISoftwareInitiatorConfigurationonESXServer

This section lists the steps required to configure the software initiator on the VMware ESX Server.

Connect to the ESX server/VirtualCenter using VI Client, and follow the below steps:

1. Select Configuration->Storage Adapters on the ESX server

2. Select iSCSI software adapter and click on Properties. The iSCSI initiator Properties

window appears.

Figure 3: iSCSI software initiator tab on VI client

3. Under the general tab select Configure tab. Select the Enabled checkbox and click OK.

Select Close.

Figure 4: iSCSI software initiator properties window

4. Select iSCSI software adapter under storage. You should now see your iSCSI Target

name listed.

Dell Inc. 6

1 2 3 4 5 6 7 8 9 10 11

Keine Kommentare

Dell PowerVault NX1950 Bedienungsanleitung Seite 6