Dell OptiPlex NX1 Bedienungsanleitung PDF herunterladen (Seite 89)

Removing and Replacing Parts on the Low-Profile Chassis 4-19

9LGHR0HPRU\

You can upgrade video memory from 4 to 8 MB by installing a video-memory

upgrade module in the video-memory upgrade socket on the system board.

Adding additional video memory increases the system’s video performance

and provides additional modes for high-resolution/expanded color applications.

To install the video memory upgrade, follow these steps:

1. Remove the expansion-card cage.

2. Orient the video-memory upgrade module as shown in Figure 4-18. Then

carefully align the module’s edge connector pins with the socket ensuring

that the slot in the module mates with the socket key.

3. Press the video-memory upgrade module firmly into the socket, and pivot

the module downward until the module clicks into place.

NOTE: If you do not hear a sharp click when installing the video-memory

upgrade module, remove the module and repeat steps 2 and 3.

4. Replace the expansion-card cage.

5. Replace the computer cover, and reconnect the AC power cable to the

electrical outlet. Press the power button on the computer to reboot the

system.

NOTE: As the system boots, it automatically detects the presence of the

new video-memory upgrade module and automatically changes the sys-

tem configuration information in the System Setup program.

video-memory

upgrade socket

video-memory

upgrade module

notch

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 169 170

Keine Kommentare

Dell OptiPlex NX1 Bedienungsanleitung Seite 89