Dell OptiPlex GX520 Bedienungsanleitung Seite 7
- Seite / 229
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
System Setup Options
Key Functions — This field appears below the Option Field
and lists keys and their functions within the active system
setup field.
NOTE: Depending on your computer and installed devices, the items listed in this section may or may not appear.
System
System Info
Lists the computer name, BIOS version, and service tag.
CPU Info
Identifies whether the computer's processor supports Hyper-Threading and identifies the CPU speed, bus speed, clock speed, and L2 cache.
Memory Info
Indicates amount of installed memory, computer memory speed, amount of video memory, size of the display cache, and channel mode (dual
or single).
Date/Time
Displays current date and time settings.
Boot Sequence
The computer attempts to boot from the sequence of devices specified in this list.
Drives
Diskette
Drive
This option enables or disables the floppy drive. The options are Off, Internal, USB, and Read Only.
Drive 0
through Drive
n
Identifies and enables and disables the drives attached to the SATA or IDE connectors on the system board and lists the capacities for the
hard drives.
NOTE: These options appear as Drive 0 through Drive 3.
Module Bay
Enables or disables devices in the module bay. The options are On or Off. The default setting is On.
NOTE: The USB Controller and Diskette Drive setup option affect operation of the optional floppy drive in the module bay.
Drive
Controller
Configures the serial ATA controller's operating mode. Normal enables the serial ATA controller to operate in its serial ATA native mode only.
Compatible enables the serial ATA controller to operate in serial/parallel ATA combination mode.
Error
Reporting
This setting determines whether hard drive errors are reported or not during system setup.
SATA
Operation
Configures the operation mode of the integrated hard-drive controller.
Normal — The hard-drive controller is configured for native mode. This mode provides the highest drive performance and most flexibility.
Combination — The hard-drive controller is configured for combination mode. This mode enables compatibility with some older operating
systems that do not support SATA drives.
The factory default setting is Normal.
NOTE: Changing this setting affects the order in which drives are listed. However, system setup does not reflect these changes until after a
reboot.
SATA
Reporting
Controls whether hard drive errors for integrated drives are reported during system status. This technology is part of the SMART (Self-
Monitoring Analysis and Reporting Technology) specification.
The options are On or Off. The default setting is Off.
Onboard Devices
Integrated
NIC
You can set the NIC to On (default setting), Off, or On w/ PXE. When the On w/ PXE setting is active (available only for the future boot
process), the computer prompts the user to press <Ctrl><Alt><b>. Pressing this key combination causes a menu to display that allows you
to select a method for booting from a network server. If a boot routine is not available from the network server, the system attempts to
boot from the next device in the boot sequence list.
Integrated
Audio
Enables or disables the onboard audio controller
LPT Port Mode
This option sets the operating mode for the built-in parallel port. The settings are Off, AT, PS/2 (default setting), EPP, and ECP.
l AT — The port is configured for IBM®AT compatibility.
l PS/2 — The port is configured for IBM PS/2 compatibility.
l EPP — The port is set for enhanced parallel port protocol.
l ECP — The port is set for extended capability port protocol.
LPT Port
Address
This option sets the address that the built-in parallel port uses. The settings are 378h (default setting), 278h, and 3BCh.
PCI Slots
Enables or disables the PCI slots.
Serial Port
#1
Auto, the default setting, automatically configures a connector to a particular designation (COM1 or COM3).
Serial Port
#2
Auto, the default setting, automatically configures a connector to a particular designation (COM1 or COM3). (This setting appears only if an
optional serial port adapter is installed.)
USB
USB devices are detected and supported in the operating system when this option is set to On.
- Mini Tower Computer 1
- Desktop Computer 1
- Small Form Factor Computer 1
- Advanced Features 2
- Security 3
- Password Protection 3
- System Password 4
- Administrator Password 5
- System Setup 6
- System Setup Options 7
- Boot Sequence 9
- Booting to a USB Device 10
- Clearing CMOS Settings 12
- Hyper-Threading 12
- Power Management 13
- Battery 14
- Before You Begin 16
- Chassis Intrusion Switch 20
- Cleaning Your Computer 23
- Desktop Computer 26
- Finding Information 27
- Operating System CD 28
- Getting Help 30
- Problems With Your Order 31
- Product Information 31
- Before You Call 32
- Contacting Dell 32
- Glossary 41
- Memory 53
- Removing Memory 54
- Mini Tower Computer 59
- PCI Express Cards 67
- Removing a PCI Express Card 69
- Removing a Hard Drive 76
- Adding a Second Hard Drive 78
- Drive-Panel Inserts 79
- Power Supply 101
- DC Power Connectors 102
- DC Power Connector P2 103
- DC Power Connector P4 103
- DC Power Connector P7 103
- FCC Notices (U.S. Only) 109
- Drivers 113
- Creating a Restore Point 114
- Before You Begin 115
- Reinstalling Windows XP 116
- Removing the System Board 118
- Desktop System Board Screws 119
- Replacing the System Board 120
- Desktop Computer 121
- Back View 122
- Back-Panel Connectors 122
- Inside Your Computer 123
- System Board Components 124
- Jumper Settings 124
- PCI Cards 126
- Removing a PCI Card 127
- Serial Port Adapters 132
- Drives 136
- CD/DVD Drive 137
- Installing a CD/DVD Drive 138
- Floppy Drive 139
- Installing a Floppy Drive 140
- Hard Drive 141
- Installing a Hard Drive 142
- I/O Panel 144
- Processor 146
- Installing the Processor 147
- DC Power Connector P3 152
- DC Power Connector P5 and P6 152
- Back to Contents Page 157
- Front View 158
- PCI Cards 163
- Abbreviations and Acronyms 185
- Small Form Factor Computer 185
- Solving Problems 186
- Keyboard Problems 187
- A program stops responding 188
- A program crashes repeatedly 188
- A solid blue screen appears 188
- Memory Problems 189
- Mouse Problems 189
- Network Problems 190
- Power Problems 190
- Printer Problems 191
- Restoring Default Settings 192
- Sound and Speaker Problems 192
- Video and Monitor Problems 193
- Mini Tower Computer 204
- Dell Diagnostics 206
- System Lights 207
- Diagnostic Lights 208
- Beep Codes 209
- Error Messages 210
- Microsoft 212
- Windows 212
- Warranty 223
- Adding User Accounts 225
- Fast User Switching 225
- Network Setup Wizard 225
Verwandte Produkte und Handbücher für Computers Dell OptiPlex GX520
Computers Dell OptiPlex GX110 Bedienungsanleitung
(137 Seiten)
(137 Seiten)
Computers Dell PowerEdge M605 Bedienungsanleitung
(210 Seiten)
(210 Seiten)
Computers Dell PowerEdge R410 Bedienungsanleitung
(151 Seiten)
(151 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.131 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern