Dell Dimension 8300 Bedienungsanleitung PDF herunterladen (Seite 89)

Adding Parts 89

3 Disconnect any telephone or telecommunication lines from the computer.

4 Disconnect your computer and all attached devices from their electrical outlets, and

then press the power button to ground the system board.

CAUTION: To guard against electrical shock, always unplug your computer from

the electrical outlet before opening the cover.

Open the computer cover (see page 78).

6 Lay the computer on its side so that the system board is on the bottom of the inside of

the computer.

7 If necessary, remove a memory module:

a Press out the securing clip at each end of the memory module connector.

b Grasp the module and pull up.

If the module is difficult to remove, gently ease the module back and forth to

remove it from the connector.

8 To insert a module, press out the securing clip at each end of the memory

module connector.

securing clips (2)

connector

memory connector closest

to microprocessor

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 145 146

Keine Kommentare

Dell Dimension 8300 Bedienungsanleitung Seite 89