Dell Dimension 5100C Bedienungsanleitung PDF herunterladen (Seite 39)



11. Connect your computer and devices to electrical outlets, and turn them on.

Clearing CMOS Settings



1. Follow the procedures in "Before You Begin."



2. Remove the computer cover.



3. Remove the hard drive.



4. Reset the current CMOS settings:

a. Locate the 3-pin CMOS jumper (RTCRST) on the system board.

b. Remove the jumper plug from pins 2 and 3.

c. Place the jumper plug on pins 1 and 2 and wait approximately 5 seconds.

d. Replace the jumper plug on pins 2 and 3.



5. Replace the hard drive.



6. Replace the computer cover.



7. Connect your computer and devices to electrical outlets, and turn them on.

Back to Contents Page



CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 45 46

Keine Kommentare

Dell Dimension 5100C Bedienungsanleitung Seite 39