Dell PowerVault TL2000 Bedienungsanleitung PDF herunterladen (Seite 11)

Dell PowerVault^*^ TL4000/TL2000 Failover Guide

Single FC Drive Failover configuration

(Two HBA adapters, One FC switch, and one FC drive)

Main Path

Failover Path

Figure 7: Reference Configuration 7

LT05 Specific Requirements For Failover Support

The introduction of LT05 drive support in the Dell PowerVault™ TL2000 and TL4000 allowed additional

failover configurations. These configurations are unique to the Dell PowerVault™ TL2000 and TL4000

configured with LT05 devices and do not extend to LT04 configurations.

Important Note: Failover is only supported on Dell PowerVault™ TL2000 when configured with LT05

drives

Failover Reference Configuration 8:

One host with two Fibre Channel ports, one Fibre Channel switch, and a Dell PowerVauir*^

configured with three Fibre Channel drives

In this configuration, failover occurs if one or more of the following occurs:

- One of the drives fails (hardware failure or is drive disconnected from the HBA port)

- One of the Fibre Channel ports in the HBA fails

11 I P a g e 12/31/09 version 2.0

Always refer to www.dell.comXsupport for latest documentation and updates

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 21 22

Keine Kommentare

Dell PowerVault TL2000 Bedienungsanleitung Seite 11