
10
The number of Remote Replicas is limited to:
maximum of 32 per array
Table 4. MD-Series Storage Array Rules for Dense, 4U Models Only (MD3260,
MD3260i, MD3660i and MD3660f)
Support for up to 180 physical slots with a premium
feature activation.
Maximum number of physical disks in a RAID0,
RAID1/10 is 120.
Up to two MD3060e series expansion enclosures can
be attached to MD3260/MD3260I/MD3660i/MD3660f
dense storage arrays for a total of 3 MD3x60
enclosures.
Support for up to 120 physical slots (system default
configuration).
A minimum of 20 SAS or SSD drives are required in
each MD3x60 enclosure (4 in front of each drawer)
Default IPv4 settings for the Management Ports on the
MD Series Storage Arrays
NOTE: No default gateway is set.
By default, the management ports on the storage array are set to DHCP. If DHCP fails, the
following IPv4 settings will be used:
Table 5. Default IPv4 Management Port Addresses
Kommentare zu diesen Handbüchern